Modifying The Basic Settings - Bosch Oven Instruction Manual

Modifying the basic settings

Basic setting
c1 Time display
c2 Duration of signal after the
cooking time or the time set on
the timer has elapsed
c3 Time delay for a setting to be
applied
* Manufacturer's setting
Note
22
The oven has different basic settings. These settings
can be adapted to the user's personal requirements.
Option 1
Always show the
time display*
Approx. 10 s
Approx. 2 s*
The following can only be done if no other time
functions have been programmed.
1.
Press the 0 button for approximately 4 seconds.
The indicator panel will show the current basic
setting for the time, e.g. c1 for Option 1.
2.
Modify the basic setting using the @ or A buttons.
3. Confirm using the 0 button.
The indicator panel will show the next basic
setting. Move through the different levels using
the 0 button and modify the setting using the @
or A buttons.
4.
Press the 0 button for approximately 4 seconds to
end.
All the basic settings have been applied.
The basic settings may be modified again at any time.
The basic settings will not be retained if the appliance
is switched off at the mains or there is a power cut.
The oven will be reset to the manufacturer's settings.
Option 2
Hide the time
display
Approx. 2 mins*
Approx. 5 s
Option 3
-
Approx. 5 mins
Approx. 10 s