Trackball - Canon R-F10 Operation Manual

7.3.4 Trackball

Clean the trackball if it does not rotate smoothly.
(1) Turn the trackball cover in counter-
clockwise direction to remove it.
NOTE: Trackball cover will be re-
(2) Remove the trackball from the claws of the trackball cover.
(3) Wash the trackball in water.
(4) There are three rollers inside the aperture where the trackball was placed.
Wipe these rollers and the back of the trackball cover with a piece of cloth soaked in
water and wrung dry.
(5) After the trackball and other parts that have been wiped are dry, return the trackball to
the trackball cover.
(6) Return the trackball cover by aligning
the longer claw of the cover with the
arrow indicated on the edge of the
aperture.
NOTE: Cover will not fit into the hole
(7) Turn the trackball cover in clockwise
direction until it stops.
7.3 Cleaning and Disinfection
moved with the trackball. Be
careful not to hit or drop the
trackball cover when the
trackball is attached to it, as
the trackball will fall out easily.
unless the longer claw is
properly aligned with the
arrow.
Trackball cover
– 45 –
Longer claw
Arrow