Operation Panel - Canon R-F10 Operation Manual

3.3 Operation Panel

1
1 DISP Switch
Press this switch in order to enter DISPLAY
mode, where you can see measurement data
stored in memory.
2 IOL Switch
Press this switch when the examinee's eye is
difficult to measure due to cataract or for
examinee with intraocular lens (IOL). Lamp on
the switch lights when the switch is ON.
3 VD Switch
Vertex distance switches between 12.0 mm or
13.5 mm (for glasses) and 0 mm (for contact
lenses).
4 R/L Switch
Each time the switch is pressed, the measure-
ment head moves either to the right or left eye.
3.3 Operation Panel
2 3 4
5
6
5 Trackball
Moves the measurement head up and down,
right and left.
6 START Switch
When this switch is pressed in automatic
measurement mode, automatic alignment and
measurement are performed. In manual mea-
surement mode, only measurement is per-
formed.
7 PRINT Switch
Press this switch in order to print or transfer the
measurement.
– 6 –
7