Energizer UNIVERSAL CHARGER Instruction Manual

IMPORTANT SAFETY INSTRUCTIONS:

•
For Nickel Metal Hydride (NiMH) and Nickel Cadmium (NiCd) rechargeable AA, AAA, C, D
& 9V batteries only.
•
Never charge NiCd and NiMH batteries together.
•
Do not use to charge Alkaline, Carbon Zinc, Lithium or any other kind of battery not
specified on the charger.
•
Remove the batteries from the unit once they are charged, and disconnect the charger from
the power outlet.
•
For indoor use only.

OPERATING INSTRUCTIONS:

1. Connect the AC adapter's output plug to the charger.
2. Open the safety cover by pressing the "OPEN" button. Insert batteries in the charger
respecting the polarity (+/-).
If the polarity is reversed or the batteries are not suitable for charging, the red LED will flash and
the charger will not start charging.
3. Load either:
AA/HR6/RC6
AAA/HR03/RC3
C/HR14/RC14
D/HR20/RC20
9V/HR22
DO NOT MIX BATTERY SIZES OR CAPACITIES IN SAME CHANNEL WHILE CHARGING.
See Pictures for how to insert the batteries into the compartments.
4. Plug the charger to a household electric outlet. The red LED will illuminate indicating that
charging is in progress.
5. When AA, AAA, C & D batteries are charged (CH1, CH2), the red LED will turn off after the
pre-set charging time is reached. The green LED will light up indicating that the trickle
charge is on. The batteries are charged and ready for use.
UNIVERSAL CHARGER
INSTRUCTION MANUAL
2 or 4 pieces at a
time
2 or 4 pieces at a
time
2 or 4 pieces at a
time
2 or 4 pieces at a
time
1 or 2 pieces at a
time