Changing The Flash Settings - Kodak EasyShare Z612 User Manual

Changing the flash settings

NOTE: Flash settings are pre-set for each picture-taking mode. Some of the flash settings may not be
available in all Capture or Scene modes. When you change to Auto or Red-eye in some of these
modes, it becomes the default until you change it.
Flash modes
Auto
Flash
Fill
Red-eye The flash fires once so the eyes become accustomed to the flash, then
Off
Flash-icon behavior
blinks, the flash is charging.
When
Take a picture when the icon stops blinking.
www.kodak.com/go/support
Flash fires
When the lighting conditions require it.
Every time you take a picture, regardless of the lighting conditions. Use
when the subject is in shadow or is "backlit" (when the light is behind
the subject). In low light, hold the camera steady or use a tripod.
fires again when the picture is taken.
Never.
Doing more with your camera
Press the Flash button repeatedly
to scroll through the flash modes
and to select a mode.
The active icon is displayed
in the EVF/LCD screen.
25