Changing A Programme; Selecting An Additional Function; Programme Sequence Indicators; At The End Of A Programme - Miele G 7883 Operating Instructions Manual

Changing a programme

Provided the Start button has not yet
been pressed, a wrongly selected
programme may be changed as
described below (if it has been
pressed, see "Cancelling a
programme").
^ Turn the programme selector to the
required programme.
^ Select additional function DRYING
0 again if required (see "Selecting
an additional function").
^ Press the Start button 6.

Selecting an additional function

The following additional function can be
selected:
^ 0 DRYING
Drying may be selected as an
additional function as soon as the
programme has been selected
(except with PRE-RINSE D and
DRAIN 6). The drying phase
operates with pulsed heating for ten
minutes. The total running time of the
programme lengthens accordingly.

Programme sequence indicators

The indicator light for the active
programme stage lights up during the
programme.
k Reactivation
Pre-wash
I
l Main wash and disinfection if
applicable
H Interim rinse / Final rinse
and disinfection if applicable
c Drying (additional function)
r End of programme
(Programme parameters have
been reached)

At the end of a programme

The programme has ended when r
lights up constantly in the programme
sequence display and the Start
indicator light 6 has gone out. A "0"
appears in the middle of the display. All
the other indicator lights come on and
go out in sequence. At the same time a
buzzer sounds for a maximum of 30
seconds (standard setting). The buzzer
can be changed (see "Programming
special functions").
Use the ß button to call up the total
running time of a programme or the
actual temperature.

Switching off

^ Press and release the I-0 button.
Note:
As the machine is fitted with an electric
door lock, the door can only be opened
if the I-0 button is pressed in (see
Opening and closing the door).
Operation
31