4b
Attach the LCD connector (part 2).
5b
There are thin black corner and right side
marking lines (as shown in the picture) on the
PWB for LCD alignment. The LCD MODULE should
be next to the markings but it should not cover
the lines.
Put the LCD connector first in place and then align
the upper corners of the LCD and the right side
using the lines as a guide.
Note that the LCD should not touch the 2
CAMERA BOOT or cover the alignment marking
lines after it is placed on the PWB
21
Issue 1
ND
CONFIDENTIAL
Copyright © 2008 NOKIA. All rights reserved.
5a
Place the LCD MODULE into the correct position.
5c
This is the position of the LCD FLEXwhen the LCD is
in its place.
5630 XpressMusic RM-431, RM-432
Service Manual Level 1&2