Settings In Bios Setup - Fujitsu SCENIC S Operating Manual

Preparation for use and operation
Shift key
enables upper-case letters and the upper key symbols to be used.
Alt Gr (e. g. German keyboard)
Alt Gr
produces the character shown on the right-hand side of a key (e. g. the
character [€]).
Num Num Lock key
by pressing the Num Lock key you switch between the Numeric keypad cursor
control functions and digit or comma functions.
When the Num Lock indicator is lit the digit and comma keys are active.
When the Num Lock indicator is not lit the cursor control functions are active in the
Numeric keypad.
Ctrl key
Strg
starts key combination actions.
Strg Alt

Settings in BIOS Setup

The BIOS Setup menu allows you to set your hardware configuration and system functions. The PC
is delivered with factory default settings (see Technical Manual for the system board or the "BIOS
Setup" manual). You may customise these settings to your requirements in the BIOS Setup.
The technical manual of the system board or the "BIOS Setup" manual shows you how to start and
use the BIOS Setup. The menus and setting options provided by the BIOS Setup are also described in
detail.
22
Warm boot
Entf
restarts your PC. First hold down the [Ctrl] and [Alt] key, and
then press the [Del] key. With Windows 98, Windows 2000,
Windows ME and Windows NT Task Manager appears first.
Then you must press all three keys again to re-boot.
Settings in BIOS Setup
A26361-K523-Z100-6-7619