Page 2
Thank you for buying an innovative product from Fujitsu. Latest information about our products, useful tips, updates etc. is available on our website: "http://www.fujitsu.com/fts/" You can find driver updates at: "http://support.ts.fujitsu.com/download" Should you have any technical questions, please contact: •...
Page 5
FUJITSU Desktop ESPRIMO D53x / D73x Operating Manual Your ESPRIMO Important notes Device overview Getting started Connecting external devices Switching on for the first time: installing the software Operation Software installation and restore Problem solutions and tips Clean/replace dust filter System expansions and repairs Technical specification...
Page 6
Information on the product description meets the design specifications of Fujitsu and is provided for comparison purposes. Several factors may cause the actual results to differ. Technical data is subject to change without prior notification. Fujitsu rejects any responsibility with regard to technical or editorial mistakes or omissions.
• in your operating system documentation • in the document "Data deletion" Validity of the Reference Manual This reference manual applies to the following systems: • FUJITSU Desktop ESPRIMO D538 • FUJITSU Desktop ESPRIMO D738 Fujitsu...
"Safety information" • cross-references to an external source, e.g. a web address: For more information, go to "http://www.fujitsu.com/fts" • Names of CDs, DVDs and titles or designations for other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual indicates a key on the keyboard, e.g:...
Clean the optional dust filter of the system at regular intervals (see chapter "Clean/replace dust filter", Page 31). Energy saving, disposal and recycling Disposal Energysaving Recycling Drivers& UtilitiesDVD User DocumentationDVD You can find information on these subjects in the "Environment and Energy Information" manual or on our website ("http://www.fujitsu.com/fts/about/fts/environment-care/"). Fujitsu...
6 = ON/OFF switch with power indicator (see "Indicators on the device", Page 7 = hard disk indicator (see "Indicators on the device", Page 8 = memory card reader (optional) 9 = ports, depending on the configuration level (see "Ports on the device", Page Fujitsu...
5 = two slots for low-profile boards or port expansions (VGA, eSATA, etc.) 6 = provision for security lock 7 = ports, depending on the configuration level (see "Ports on the device", Page 8 = AC voltage socket (AC IN) Fujitsu...
Device overview Indicators on the device Indicators, Device The indicators are on the front of the casing. Which indicators are available on your device depends on the configuration level you have selected. Fujitsu...
Page 15
ON/OFF switch, the device powers up or returns to the state it was in before it entered energy-saving mode. • The indicator is not lit: The device is switched off. Hard disk indicator The indicator lights up when the hard disk drive in the device is being accessed. Fujitsu...
Drives and boards If you have received drives or boards as well as your device, please do not install them until after first-time setup. Installation of drives and boards is described in the "System expansions and repairs" manual. Fujitsu...
Vertical operating position with feet (optional) Use the optional feet when you wish to use the device in the vertical operating position. The set-up direction is compulsory: The captions "FUJITSU" and "ESPRIMO" must be facing upwards so that sufficient ventilation is ensured.
Page 18
► Place the feet (3) on the left side of the device so that the pins (2) enter into the corresponding guide openings (4) on the device and the screws rest against the screw holes (6). ► Tighten the screws to secure the feet. ► Stand the device on the feet as shown. Fujitsu...
Russia and the Commonwealth of Independent States (CIS), large parts of Europe, parts of South America, the Middle East, parts of Africa, Hong Kong, India, large parts of South Asia. UK, Ireland, Malaysia, Singapore, parts of Africa China, Australia, New Zealand Fujitsu...
Do not connect or disconnect cables during a thunderstorm. Always hold the plug of a cable when removing it. Never unplug a cable by pulling the cable itself. To ensure that your device works properly, use only the connection cable supplied or use a high-quality connection cable. Fujitsu...
Socket type C black: Universal Serial Bus - USB 3.1 (Gen2) PS/2 mouse port, green PS/2 keyboard port, purple DP1 / DP2 Displayport DVI-D screen connection Serial port Audio output (Line Out), light green Audio input (Line In), light blue LAN port Fujitsu...
The PS/2 mouse is only detected by the device if you connect the mouse when the device is switched off and then switch the device on again. ► Connect the PS/2 mouse to the PS/2 mouse port of the device. PS/2mouse, Connecting, PS/2mouse, ► Switch your device on again. Fujitsu...
The devices connected to the serial interface require drivers. Your operating system already includes many drivers. If the required drive is missing, install it. The latest drivers are usually available on the Internet or will be supplied on a data carrier. Fujitsu...
External USB devices which you connect to one of the USB ports don’t usually need their own drivers because the software required is already included in the operating system. If the device requires separate software, please follow the instructions in the manufacturer’s documentation. Fujitsu...
You will find more information on the system, as well as drivers, utilities and updates on the optional "Drivers & Utilities" DVD and on the Internet at "http://www.fujitsu.com/fts/support". You can find information and help on the Windows operating system functions on the Internet at "http://windows.microsoft.com".
Setup, In the BIOS Setup, you can set system functions and the hardware configuration of the device. At delivery, the default entries are effective (see BIOS manual or mainboard manual). You can customize these settings in the BIOS Setup. Fujitsu...
Lead-sealing To prevent unauthorised persons from opening the casing, the casing can be lead-sealed. To do this, feed the sealing chain through the eye (1) and seal the chain with the lead seal. Fujitsu...
Operating the SmartCard reader (optional) ► Connect the external SmartCard reader to your system as described in the instructions for the SmartCard reader. SmartCard reader, After the device is switched on, you will be prompted to insert your SmartCard. Fujitsu...
EraseDisk DeleteSATAharddisk Erase Disk is a solution integrated in the firmware of FUJITSU desktops (UEFI: Unified Extensible Firmware Interface) to delete all data from a hard disk or Solid State Disc drives (SSDs). With this function, all data from internal or external hard disks or SSDs connected via the eSATA port can be irretrievably deleted before the hard disks are disposed of or the entire system is disposed of.
Download current drivers/software ► Switch the device on. ► In the browser, select the address "http://www.fujitsu.com/fts/support". ► Select the desired product group, e.g. Client Computing Devices. ► In the Downloads area, select the entry More Details.
► Contact the Service Desk responsible for your country for clarification of the problem: "http://support.ts.fujitsu.com/contact/servicedesk". When you do this, please have ready the ID number and serial number of your system.
► Restart the system. Incorrect setting for the monitor ► Press while the system is booting. ► Start the system in Safe Mode. ► Set up the monitor as described in the documentation for your operating system and monitor. Fujitsu...
► Check whether you have inserted your SmartCard into the SmartCard reader the right way with the chip facing upwards. ► Check whether the SmartCard you are using is supported. Your SmartCard must comply with the ISO standard 7816-1, -2, -3 and -4. Fujitsu...
Error messages and their explanations are provided: • in the technical manual for the mainboard • in the documentation for the programs used Tips Topic Out of system resources ► Close unnecessary applications. ► Run the applications in a different order. Fujitsu...
At high ambient temperature and/or dust exposure: monthly to semi-annually You can use the Dustfilter Cleaning software to configure the time interval. You can find the software on the Internet at "http://support.ts.fujitsu.com/download". ► Remove the dust filter from the front panel (1).
Servicing Information on system expansions and repairs can be found on the Internet in the "System Expansions and Repairs" manual at "http://www.fujitsu.com/fts/support". Operations that are distinguished in the manual as Only For Service, such as repairs to the device, may only however be performed by authorised service technicians.
Clearance required to ensure adequate ventilation: Without air vents min. 10 mm / 0,39 in. With air vents min. 200 mm / 7,87 in. The data sheet for this device provides further technical data. The data sheet can be found on our website "http://fujitsu.com/fts/". Fujitsu...
Delete SATA hard disk 25 Device Lead-sealing 23 Connections 17 Line In 17 Line Out 17 indicators 10 switching off 22 Lock 24 Switching on 22 Device drivers, serial interface 19 Mains adapter Device, connecting 15 Anti-theft protection 23 Lead-sealing 23 Fujitsu...
Page 39
18 USB port, port 18 connecting devices 20 connecting keyboard 19 connecting the mouse 18 Recycling 7 User Documentation DVD 7 Retransportation 7 Vertical operating position 13 Safety information 7 Video workstation 13 Security functions BIOS Setup 24 Fujitsu...