Dell Remote Console Switch User Manual page 139

where a user would need to set a value based on the criteria at the end of that
line.
NOTE: Any instructions below with text in <anglebrackets> is where a user
would need to set a value based on the criteria at the end of that line.
To create a certificate to import:
1 From the Linux command prompt, type openssl and press <Enter>. The
user should be at the OpenSSL prompt.
OpenSSL> genrsa -out privatekey.pem <512>
Generating RSA private key, 512 bit long modulus
..........++++++++++++
.....++++++++++++
e is 65537 (0x10001)
OpenSSL> req -new -key privatekey.pem -x509 -out certificate.pem-
batch-days <365>
2 Enter the information that will be incorporated into your certificate request
in the Distinguished Name or DN. There may be a default value for some
fields. If you wish, you may type '.' to leave a field blank.
-----
Country Name (2 letter code) [GB]:<US>
State or Province Name (full name) [Berkshire]:<Texas>
Locality Name (eg, city) [Newbury]:<Austin>
Organization Name (eg, company) [My Company Ltd]:<Dell, Inc.>
Organizational Unit Name (eg, section) []:<Round Rock>
Common Name (eg, your name or your server's hostname) []:<RCS
DNS Name or IP>
Email Address []:<support@dell.com>
OpenSSL> quit
LDAP Feature for the RCS
xxx | xxx
129