Closing A Virtual Media Session - Dell Remote Console Switch User Manual

• Target Drive - Name used for the mapped drive, such as Virtual CD 1 or
Virtual CD 2.
• Mapped to - Identical to Drive information that appears in the Client View
Drive column.
• Read Bytes and Write Bytes - Amount of data transferred since the
mapping.
• Duration - Elapsed time since the drive was mapped.
To close the Details view, click Details again.
To reset all USB devices on the target device:
NOTE: The USB reset feature resets every USB device on the target device,
including the mouse and keyboard. It should only be used when the target
device is not responding.
1 In the Virtual Media dialog box, click Details.
2 The Details View will appear. Click USB Reset.
3 A warning message will appear, indicating the possible effects of the reset.
Confirm or cancel the reset.
4 To close the Details view, click Details again.

Closing a Virtual Media Session

To close the Virtual Media dialog box:
1 Click Exit.
2 If you have any mapped drives, a message is displayed, indicating that the
drives will be unmapped. Confirm or cancel the operation.
If a user attempts to disconnect a virtual media session or an active KVM
session that has an associated locked virtual media session, a confirmation
message is displayed, indicating that any virtual media mappings will be lost.
The Video Viewer Window
xxx | xxx
101