Adding Another M7 And Hub To A Single M7 In Use - Samsung WAM750 User Manual

Adding another M7 and Hub to a single M7 in use

❚
When the M7 in use is connected to the router with a LAN cable
`
Disconnect the LAN cable from the M7 in use.
1
Connect the HUB to the wireless router with the LAN cable, and then plug in the
2
HUB's power cable.
Plug in the power cable of the new M7. The new M7's blue LED pairing indicator starts
3
to flash. Wait until the pairing indicator on the M7 stops flashing. When the indicator
stops flashing, pairing is complete. The M7 may also beep.
Turn off the old M7 by disconnecting the power cable. Then. connect it again.
4
Press the
indicator starts to flash. Wait until the pairing indicator on the M7 stops flashing. When
the indicator stops flashing, pairing is complete. The M7 may also beep.
On your smart device, select the Samsung Multiroom app. Setup starts.
5
SPK Add
button on the back of the M7. The M7's blue LED pairing
4444 44