Connections; Connecting With A Hub (Not Included); Connecting The M7(S) To Your Network With A Hub (Not Included) - Samsung WAM750 User Manual

Connections

Connecting with a HUB (Not Included)

A
• If the M7 fails to connect to your network or its network connection operates abnormally,
place the M7 closer to the HUB or your router and try again.
• The M7 is a wireless network device. Its communications with your network may
be disrupted because of the distance between it and other devices on the network,
obstructions, or interference from other wireless devices.

Connecting the M7(s) to your Network with a HUB (Not Included)

❚
Wireless Router
Connect a LAN cable to the router and the
1
HUB.
NOTE
9 You can connect the LAN cable to any
Attach the HUB's power cord to the power port on the rear of the HUB, and then plug
2
the power cord into an electrical outlet.
The power (
3
When the pairing indicator (
The pairing indicator on the M7 starts to flash.
If the HUB's pairing indicator does not flash, press the
HUB.
NOTE
9 If you are adding multiple M7s, connect all the M7's to electrical outlets. If you are not connecting all
the M7s, refer to pages 43~45.
Wait until the pairing indicator on the M7 stops flashing. If the M7's LED indicator turns
4
solid blue, pairing is complete. The M7 may also beep.
HUB
LAN Plug In
) and the HUB ( ) indicators on the HUB's front turn on.
) begins to flash, plug the M7(s) into an outlet.
Press here
ETHERNET SWITCH
ETHERNET SWITCH
Port on the HUB.
SPK Add
4444 23
POWER
Plug In
on the back of the
button on the rear of the