Remote Functionality; Firmware Update - Mede8er MED250X User Manual

REMOTE FUNCTIONALITY

Skip Forward/Back
Volume Up/Down

FIRMWARE UPDATE

Download the latest Mede8er Firmware from www.mede8erforum.com.
UnZIP or UnRAR the file and you will find one file named install.img. Copy this file to the root directory of a
Flash Drive. Plug the flash drive into the Mede8er. Disconnect the power jack at the rear of the Mede8er
then plug it back in - Now press the on/off button and hold it pressed for 10 seconds and then release.
After approximately 15 seconds the LED on the Mede8er will flash blue and you will get a progress bar with
a percentage indicator on your TV display (some TV's may not display this) wait until the Mede8er re boots
itself +- 4 minutes. Your Mede8er is now be updated.
DO NOT REMOVE POWER DURING THE EMERGENCY RECOVERY PROCEDURE.
On / Off
TV System
Slow / Zoom
Edit Menu
Home Page
Navigation Left
Numbers
Repeat Shuffle
Audio Mute
Setup Menu
DVD Menu / Menu
Subtitle
Select
Confirm
Info Screen
Play /Pause / Stop
Return
Navigation Up
Navigation Right
Navigation Enter
Navigation Down
Next/Previous
Fast Forward
Rewind
Goto
Music Playlist
Audio Selection
Power Up and hold on/off button for
10 seconds
Page7