External Audio Device; Using An S-Air Product - Sony BDV-E770W / T77 Operating Instructions Manual

External Audio Device
To set the ID of the unit
1
Set the S-AIR 10 switch of the unit to
the desired 10.
~
c:
Q.
0'
o
CD
<
n·
CD
m
><
S' ...
::J
!.
•
IDA IDA
~""'-= - '-'-+]
S-AIR 10 switch
You can select any ID (A, B, or C).
2
Press 1/(').
The system turns on.
3
Set the S-AIR sub unit to the same 10.
Wireless transmission is activated as
follows (example):
To set the ID of the surround
amplifier
1
Make sure that the SURROUND
SELECTOR switch of the surround
amplifier is set to SURROUND.
2
Set the S-AIR 10 switch of the surround
amplifier to match the 10 (A, B, or C) of
the unit.
3
Press
1/(')
on the surround amplifier.
When wireless transmission is activated,
the S-AIRISTANDBY indicator of the
surround amplifier turns green.
For details of the S-AIRISTANDBY
indicator, see "Surround amplifier"
(page 11).
S-AIR main unit
S-AIR sub unit
(surround amplifier)
Room A
S-AIR sub unit
(S-AIR receiver)
(not supplied)
RoomS -
About S-AIR products
There are two types of S-AIR product.
• S-AIR main unit (this unit): This is for
transmitting sound. You can use up to three
S-AIR main units. (The number of usable
S-AIR main units depends on the use
environment.)
• S-AIR sub unit: This is for receiving sound.
- Surround amplifier (supplied): You
can enjoy surround speaker sound
wirelessly.
- S-AIR rec.eiver (optional): You can
enjoy system sound in another room.
Using an S·AIR Product
For the surround amplifier
For the S-AIR receiver
Simply by matching the ID of the unit and the
S-AIR sub unit, you can activate wireless
transmission.
To set the ID of the S-AIR
receiver
Refer to the operating instructions of the S-AIR
receiver.
39
uS