Table of Contents
Advertisement
17
US
Blue.
{Surround left speaker (L))
Rear or bottom of the speaker
Gray·
{Surround right speaker (R))
Rear panel of the surround amplifier
~j;:::=~
Connector·
White
{Front left speaker (L))
Rear panel of the unit
Green
~--- (Center speaker)
~----\$~~~~
__
Purple
Red
(Subwoofer)
{Front right
speaker (R))
For connecting the system, read the information on the following pages.
Do not connect the AC power cord (mains lead) of the unit to a wall outlet (mains) until all the other
connections are made.
Step 2: Connecting the System
The connector of the speaker cords and the color tube are color-coded depending on the type of speaker.
Connect the speaker cords to match the color of the SPEAKERS jacks of the unit.
Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with
the color tube to
ffi,
and the speaker cord without the color tube to
8.
Do not catch the speaker cord
insulation (rubber covering) in the speaker terminals.
To connect speaker cords to the unit and surround amplifier
When connecting to the unit and surround amplifier, insert the connector until it clicks.
To connect speaker cords to the speaker.
-
• When you connect another component with a volurpe control, tum down the volume of the other components to a
level where sound is not distorted.
Advertisement
Table of Contents
