NEC M155 User Manual page 52

Translation Tables
OnTermination
OnUserSettings
OnWhenInCall
ToAnswerIncomingCall
ToChangeNotification
ToChangeSilent
ToDialFromTelephonebook
ToMakeSosCall
ToReadIncomingMsg
ToRejectIncomingCall
ToReplyInboxMsgWithCall
ToReplyInboxMsgWithMsg
ToReplyMsgWithCall
ToReplyMsgWithMsg
52
The silent charging mode.
When terminating the DECT subscription
you will not be able to receive or send
messages nor make calls over the DECT
system.
You can configure the following settings
on your M155:
Language
Audio
When your M155 is involved in a voice
call the behaviour on incoming
messages is the same as if the M155 is
in the idle mode. The existing call is with
respect to the voice connection not
interrupted.
To answer an incoming call, perform the
following step:
To turn the notification beep on or off,
perform the following steps:
To change the setting of the silent
option, perform the following steps:
To dial a number from the local
telephone book, perform the following
steps:
To make an SOS call, perform the
following step:
To read an incoming message, perform
the following steps:
To reject an incoming call, perform the
following step:
To set up a voice call to the call back
number indicated in a stored message,
perform the following steps:
To send a reply to the sender of a stored
message, perform the following steps:
To read an incoming message and reply
with a voice call to the call back number
indicated in the message, perform the
following steps:
To read an incoming message and reply