Terminating The M155 Subscription - NEC M155 User Manual

Terminating the M155 subscription

When terminating the DECT subscription you will not be able to receive
or send messages nor make calls over the DECT system.
To terminate the DECT system subscription, perform the following
steps:
:
:
DECT system configuration
23. Press the Lower key for a short time.
24. When the display shows the time/date the
M155 is registered and can be used.
25. Configure the number and name of your
M155 by means of the DECT Handset
Configurator Application (available to your
System Administrator).
1. Simultaneously press both keys for a short
time.
2. Repeatedly press the Upper key for a short
time until the display shows:
3. Press the Lower key for a short time.
4. Enter the PIN
5. Repeatedly press the Upper key for a short
time until the display shows: the required
digit.
6. Press the Lower key for a short time.
Note that the selected digit is added to the
Connectivity
code at the PIN prompt.
27