Table of Contents
Advertisement
Important! Neither device must be in Lock mode or displaying
the Lock screen. They must both be active and
unlocked. It is recommended that the target device
be on the Home screen.
7. Place the two active NFC-enabled devices back to back
to begin.
Note: If the Touch to beam screen does not appear on the
source device:
- Pull them apart
- Verify the image is visible in the preview window on
the source device (providing the file)
- Place them together again
8. From the Touch to beam screen, touch the reduced
image preview to begin the transfer. After a few
seconds (depending on file size) the recipient with then
see the transferred file displayed on their screen.
Taking a Screen Shot
Also known as a screen capture, this feature allows you to
mimic the print screen function on most computers.
1. From the Home screen, touch
Settings
gestures.
2. In a single motion touch and slide the Palm motion
slider to the right to turn it on.
3. Read the on-screen notification and touch OK.
Note: At least one feature must be activated before Palm
motion can be activated.
4. In a single motion, slide a feature's activation slider to
the on position.
5. With the current screen showing the desired image, in
a single motion, place the side of your palm along the
one side of the device and then slowly swipe it in the
opposite direction over the screen.
Applications and Widgets
Menu
My device tab
Motions and
102
Advertisement
Table of Contents
