Related Manuals for Steepletone SMC922
Summary of Contents for Steepletone SMC922
- Page 1 MODEL: SMC922 MUSIC SYSTEM WITH TWIN CD PLAYER & RECORDER, 3-SPEED TURNTABLE, RADIO, CASSETTE AND AUX-IN PLAYBACK INSTRUCTION MANUAL (VerIII) PLEASE READ BEFORE USE...
-
Page 2: Location Of Controls
LOCATION OF CONTROLS 1. Dust Cover 23. CDII – CD Door Open Button 2. LCD Display 24. CDII – CD Play/Pause Button 3. Remote Sensor 25. CDII – CD Door 4. FM Stereo LED Indicator 26. X-BASS On/Off Button 5. Power LED Indicator 27. -
Page 3: Fm & Fm-Stereo Reception
PRECAUTIONS FOR USE INSTALLATION • Unpack all parts and remove any protective packing materials. Please keep all packaging until you have fully checked all parts of the unit are working correctly and for future use in case the unit needs servicing. •... -
Page 4: Stylus Replacement
STYLUS REPLACEMENT When the stylus eventually needs replacing, a universal sapphire needle or stylus (suitable for 45/33/78rpm records) is available for purchase direct from the manufacturer. Please contact your supplier or Steepletone Products direct for information on how to purchase one. - Page 5 NOTES: Make sure the direction is correct when inserting a tape into the cassette slot – see line drawing. Some searching noise will be heard, this is quite normal. The system cannot perform the normal playback function during Fast Forward mode. It is strongly recommended the cassette tape is removed from the Cassette Player slot after each use - don’t leave the cassette tape inside the system when you do not intend to play it CASSETTE CARE...
-
Page 6: Important Notes
RANDOM PLAY MODE (BY REMOTE CONTROL) Pressing the RANDOM button on the remote control (17) will activate the Shuffle Play function and the Random indicator “ RAN “ will show on the LCD Display. Press the CD I Play button (10 or 17 on the RC) to start playing the CD tracks in any order. CD DISC PROGRAMMING IN CD I Up to 20 tracks on a CD can be programmed to play in any order. - Page 7 A) RECORDING MODE ) CD RECORDING MANUAL RECORDING Press the CD /Aux function button (19) to select the “ CD /Aux “ Mode. Open the drawer as described previously and place the pre-recorded CD inside the CD tray (15) - remain in Stop Mode, i.e. do not start playback yet.
-
Page 8: Recording Setting
B) RECORDING SETTING I) RECORDING LEVEL The preset recording level of the system is lower than that of the original music source to avoid distortion during recording, except when in “Aux-in” recording Mode ) MANUAL TRACK SEPARATION You can separate the music tracks to be recorded at any time during the recording process: After a track has played, press the “... - Page 9 LINE OUT CONNECTION You can link this system to another Hi-Fi system or Amplifier by connecting the Line Out socket (41 - R + L) to the Auxiliary Input socket of the other unit with an RCA cable (not provided). AUX-IN CONNECTION Connect another audio device, e.g.
-
Page 10: Specifications
EXCLUSIVE FUNCTIONS FOR CD - Play/Pause Press once to start playback. Press again to pause the music. - Skip Up / Down Press to select previous / next tracks during Playback. - Stop Press to stop playback or cancel the stored program. - Repeat Press to activate Repeat Play function.
Need help?
Do you have a question about the SMC922 and is the answer not in the manual?
Questions and answers
how do I replace the drive belt on the cassette player for the BTSMC922