Tv Channel Operation; D Convenient Functions For Receive - Icom IC-7000 Instruction Manual

4
RECEIVE AND TRANSMIT

■ TV channel operation

q Push and hold [AF(
mode ON.
• Push and hold [AF(
mode.
w Rotate [M-ch] (inner) control to select the desired
TV channel.
• [Y( )]/[Z(
BAND BAND
• The popup indicator appears and shows the selected
channel number. (The popup indicator can be turned
OFF in the display set mode. p.128)
e Push [P.AMP/ATT] momentarily to turn the preamp
ON and OFF; push and hold for 1 sec. to turn the
12 dB attenuator ON.
• The popup indicator, "
when the preamp is ON or attenuator is ON, respec-
tively. (The popup inidicator can be turned OFF in the
display set mode. p. 128)
• Each channel can store the preamp or attenuator
ON/OFF conditions independently.
• Only one of these functions can be activated at a time.
r Rotate [AF] to set a suitable audio level.

D Convenient functions for receive

• Preamp and attenuator (p. 74)
➥ Push [P.AMP/ATT] momentarily to turn the pre-
amp ON or OFF.
• " " appears when the preamp is set to ON.
➥ Push [P.AMP/ATT] for 1 sec. to set the attenua-
tor ON.
• Push [P.AMP/ATT] momentarily to turn the attenuator
OFF.
• " " appears when the attenuator is set to ON.
69
)] for 1 sec. to turn the TV
SET
)] for 1 sec again to exit the TV
SET
)] keys also select the TV channel.
" or " ," appears
[AF] [P.AMP/ATT]
[M-ch]
WARNING! NEVER
watch a TV program while
driving a vehicle. Safe driving requires your full at-
tention–anything less may result in an accident.
[Y]
[Z]