Panasonic Diga DMR-PWT520 Operating Instructions Manual page 73

Channel List
You can edit the Channel List.
All DVB Channels
1
2
3
4
5
6
7
Select
Hide
RETURN
Tune Swap Reveal all
• To hide unwanted channels
1 Select the channel.
2 Press [OK].
The check mark is removed.
• Yellow: Reveal all channels.
• To change the channel number assignment
1 Select the channel, then press the green
button.
2 Enter the channel number to reassign with
the number buttons.
3 Press [OK].
• If another channel is already assigned to the
channel number, the two channels will be
switched.
• To set the channel manually
1 Press the red button.
2 Refer to "Manual Tuning". (
Auto Setup
You can restart the Auto Setup. (
PIN is required when you have locked channels.
( 74, Child Lock List)
Select "Yes", then press [OK].
• The timer recording programmes are cancelled.
• If you perform "Channel Sorting by Region" (
Page up
Page down
you can sort the channel list best suited to your region
after Auto tuning is finished.
Channel Sorting by Region
If you want to sort the channel list best suited to
your region, follow the on-screen instructions to
select the region you live in.
Normally, you should select "Best signal quality
(All Regions)".
Manual Tuning
You can add new channels manually.
1 Adjust the frequency.
• Adjust the frequency by checking the signal
2 Press [OK] to start scan.
• The set channel is displayed in the table.
right)
Update Channel List
You can update the channel list to the latest one.
• After performing "Update Channel List" or "Manual Tuning"
if the channel number has already been assigned,
channel number for them will be assigned from 800ch
onward.
strength and signal quality displays.
Convenient functions
19)
below),