Hsgw And Mag Service Configuration - Cisco ASR 5000 Series Administration Manual

HSGW Configuration

HSGW and MAG Service Configuration

Step 1
Configure HSGW service settings by applying the example configuration in the
section.
Step 2
Configure the MAG service by applying the example configuration in the
Configuring the HSGW Service
Use the following configuration example to set parameters including binding the HSGW-eAN/ePCF interface to this
service and configuring the SPI between the HSGW and eAN/ePCF:
Notes:
The accounting policy is configured in the HSGW context using the
the pointer to the accounting policy configuration for the Rf (off-line charging) interface. Refer to
Configuring an HSGW Context
The
station is visiting, roaming, or belongs to this network.
OL-22984-01
for more information.
command configures Public Land Mobile Network identifiers used to determine if a mobile
Configuring the System to Perform as a Standalone HSGW ▀
Configuring the HSGW Service
Configuring the MAG Service
Cisco ASR 5000 Series HRPD Serving Gateway Administration Guide ▄
section.
command. This is
Creating and