Cisco ASR 5000 Series Administration Manual page 70

▀ Configuring the System to Perform as a Standalone HSGW
Creating and Configuring MAG Context
Use the following example to create a MAG context and Ethernet interface, and bind the interface to configured
Ethernet ports. The interface created in this configuration supports the S2a connection to the P-GW.
Notes:
The HSGW-to-PGW (S2a) interface must be an IPv6 address.
Creating a MAG Service
Use the following configuration example to create the MAG service:
Notes:
A separate MAG context with a MAG service can be created to segregate the HSGW network from the MAG
network. Refer to the
service in a separate context.
▄ Cisco ASR 5000 Series HRPD Serving Gateway Administration Guide
Configuring the HSGW Service section for additional information on using a MAG
HSGW Configuration
OL-22984-01