Block List - Panasonic KX-TGE210 Operating Instructions Manual

Programming
following items are available when storing
phone numbers in the call block list (250 max.).
– "Block a single number": The unit
can reject calls from specific phone
numbers.
– "Block range of numbers": The unit
can reject calls that begin with a number
stored in the call block list, such as a
toll-free phone number prefix or certain
area codes.
You can also set the unit to reject calls that do
not have a phone number.
When a call is received, the unit rings briefly
while caller information is being received. If
the caller's phone number matches an entry in
the call block list, the unit emits no sound to
the caller, and disconnects the call.
*1 This is called first ring. If you do not want
the first ring to sound, turn this setting to
"Off" (page 34).
Important:
R Rejected calls are logged in the caller list.
Storing unwanted callers
Storing a single phone number
Important:
R We recommend storing 10 digits (including
the area code). If only 7 digits are stored, all
numbers that have the same last 7 digits
will be blocked.
n From the caller list:
1
MCN CID
2
MbN: Select the entry to be blocked.
R To edit the number: MMENUN a MbN:
"Edit" a MSELECTN
Press MEDITN repeatedly until the
phone number is shown in the 10-digit
format. And then, press MSAVEN. Go to
step 5.
3
MMENUN
4
MbN: "Save CID" a MSELECTN
5
MbN: "Call block" a MSELECTN
6
MbN: "Yes" a MSELECTN
7
Edit the phone number if necessary (24
digits max.).
34
For assistance, please visit http://www.panasonic.com/help
8
MSAVEN a MOFFN
n By entering phone numbers:
1
MMENUN#217
2
MbN: "Block a single number" a
MSELECTN
3
MMENUN a MbN: "Add" a MSELECTN
4
Enter the phone number (24 digits max.).
R To erase a digit, press MCLEARN.
5
MSAVEN a MOFFN
*1
Storing a range of numbers
1
MMENUN#217
2
MbN: "Block range of numbers" a
MSELECTN
3
MMENUN a MbN: "Add" a MSELECTN
4
Enter the desired number (2-8 digits).
R To erase a digit, press MCLEARN.
5
MSAVEN a MOFFN
Blocking incoming calls that
have no phone number
You can reject calls when no phone number is
provided, such as private callers or out of area
calls.
1
MMENUN#240
2
MbN: Select the desired setting. a
MSAVEN a MOFFN
Setting the first ring for the call

block list

If you do not want the first ring from a number
on the call block list to sound, turn the first ring
setting to "Off". The default setting is "On".
1
MMENUN#173
2
MbN: Select the desired setting. a
MSAVEN a MOFFN
Viewing/editing/erasing call
block numbers
1
MMENUN#217