Table of Contents
Advertisement
Making calls
Using the handset
1
Lift the handset and dial the phone
number.
R To correct a digit, press MCLEARN.
2
M
N
3
When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Using the speakerphone
1
Dial the phone number and press MZN.
2
When you finish talking, press MOFFN.
Note:
R To switch back to the receiver, press MZN/
M
N.
Making a call using the redial list
The last 5 phone numbers dialed are stored in
the redial list (each 48 digits max.).
1
MEN REDIAL
2
MbN: Select the desired phone number.
3
M
N
Erasing a number in the redial list
1
MEN REDIAL
2
MbN: Select the desired phone number.
a MERASEN
3
MbN: "Yes" a MSELECTN a MOFFN
Using the base unit
Available for:
KX-TGE240 series (page 3)
1
MZN
2
Dial the phone number.
3
When the other party answers, speak into
the microphone.
For assistance, please visit http://www.panasonic.com/help
Making/Answering Calls
4
When you finish talking, press MZN.
Note:
R While on a call, you can switch from the
base unit to the handset:
– Press M
N on the handset, then press
MZN on the base unit with the call
sharing mode on (page 31).
– If the handset is on the base unit, simply
lift it.
Redialing the last number dialed
MZN a MREDIALN
Adjusting the receiver or speaker
volume
Handset / Base unit
*1
KX-TGE240 series: page 3
Press MjN or MkN repeatedly while talking.
Pause (for PBX/long distance
service users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 26).
Example: If you need to dial the line access
number "9" when making outside calls with a
PBX:
Handset
1
9 a MDN (Pause)
2
Dial the phone number. a M
*1
Base unit
*1
KX-TGE240 series: page 3
1
MZN
2
9 a MPAUSEN
3
Dial the phone number.
Note for handset and base unit:
R A 3.5 second pause is inserted each time
you press MDN (Pause) on the handset or
MPAUSEN on the base unit.
*1
N
17
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the KX-TGE210 and is the answer not in the manual?
Questions and answers
cannot call out or answer phone
@Marsha beverly feldman
The Panasonic KX-TGE210 may not be able to make or receive calls due to the following reasons:
1. Handset Batteries: The handset batteries may need recharging or have failed.
2. Power Failure: The phone cannot make calls during a power outage.
3. Dialing Mode: The dialing mode may be set incorrectly and needs to be adjusted.
4. Cell Locator Feature: An outside line may still be in use after the cell locator feature was used. For certain models, specific actions are required to disconnect the line.
5. Silent Mode: Silent mode might be turned on, preventing the phone from ringing.
6. Ringer Volume: The ringer volume on the base unit or handset may be turned off.
Ensure these conditions are checked and resolved to restore functionality.
This answer is automatically generated