Camera On/Off; Brightness - Lorex WIRELESS HOME MONITORING SYSTEM User Manual

Camera On/Off

Use the Camera On/Off menu to show/hide
camera channels on the main display
screen. For example, if you disable camera
3, it will not appear in any viewing mode.
To enable/disable cameras:
1 Press , then press RIGHT/LEFT to
select Camera ON/OFF and press OK.
2 Press UP/DOWN to select the desired
camera and press RIGHT/LEFT to select
Active to show the camera or Skip to hide
it.
NOTE: The currently selected camera
will have Active/Skip
highlighted in RED.
3 Press the OK button to save changes.
4 Press the button to exit.
NOTE: Any disabled channels will be
blacked out in Quad mode.

Brightness

Use the Brightness menu to adjust the
brightness level of video coming from your
cameras.
NOTE: You cannot adjust the brightness
of the LCD display.
To adjust camera brightness:
1 While viewing, press UP/DOWN to select
the camera you would like to adjust.
NOTE: You can set a separate
brightness level for each
camera.
2 Press , then press RIGHT/LEFT to
select Brightness and press OK.
3 Press RIGHT to increase the brightness
level for the selected camera or LEFT to
decrease. Press OK to confirm.
4 Press the button to exit.
5 Repeat steps 1~4 to configure your other
cameras as needed.
Camera On/Off
37