Lorex LWB3800 Series Quick Connection Manual

HD Wire-Free Security System
GUIDE
1 / 2
English Version 3.0
Package Contents
Rechargeable
Power Pack*
HD DVR DVR Power
(Model Number: LHB800 Series) Adapter
STEP 1: Initial Setup
Before you begin, you will need to prepare the wire-free cameras and power packs.
To prepare the cameras and receiver:
ATTENTION: Fully charge the power pack before use.
1. Remove the power pack from each camera by pushing
both release buttons*, then pulling down on the power
pack. Place your hand underneath the power pack
when removing to prevent it from falling.
2. Peel off the PLEASE REMOVE label covering the
contacts on each power pack.
3. Insert the charged power packs into each camera
base. Push up until the power pack 'clicks' firmly into
place.
4. Twist the adjustment ring near the camera base
counterclockwise to loosen and reposition each
camera as shown to the right. Connect one of the white
antennas to each camera.
* Top view
STEP 2: Setting Up the DVR
Next, you must set up the DVR and connect it to your network.
To set up the DVR:
1. Connect the DVR to your router
using the included Ethernet cable.
DEVICE ID: xxxxxxxxxxxxx
OPTIONAL: Full DVR Setup
• This guide describes basic setup of the DVR only. This
installation is intended for users who wish to monitor their
system using the free Lorex Cirrus app on their smartphone
or tablet.
• You may choose to use the DVR interface to control your
wire-free security system. Connect the included USB mouse
to one of the USB ports labelled Mouse / Backup, and
connect a monitor using the included HDMI cable. See the
included Quick Reference Guide for details.
Quick Connection Guide
www.lorextechnology.com
* Per camera in multi-camera packs
HD Wire-Free Security Cameras
(Model Number: LWB3800 / LWB3900 Series)
Camera Antenna* Mounting Kit*
USB Mouse
Power Pack
Ethernet Cable HDMI Cable
Adapter
*
Adjustment ring
*
2. Connect the included power adapter
to the DVR. Wait a few minutes for
the system to start up.
DEVICE ID: xxxxxxxxxxxxx
STEP 3: Connecting with Lorex Cirrus
Connect to your system using the free Lorex Cirrus app for smartphones and
tablets (iOS and Android).
To connect with Lorex Cirrus:
1. Download and install the free Lorex Cirrus app from the App Store
or Google Play Store.
2. Tap the Lorex Cirrus icon to launch the app.
3. Tap to open the menu. Tap Devices, then tap Add.
4. Enter the following:
A
B
C
D
E
5. Enter a new, secure 8-15 character password. This password will be used to
connect to your system from now on.
Record your password below and store in a secure place:
NOTE: If you have manually set your DVR, use the same password created during
that setup. The default password will not work.
STEP 4: Pairing the Cameras
Next, you must pair each camera to your recorder. You can pair cameras using the
Lorex Cirrus app, or with the recorder.
To pair cameras using the Lorex Cirrus app:
1. From Live view, tap any free
channel you would like to
pair a camera to (marked
with a icon).
*
NOTE: A "pairing successful" message should appear on screen. If you do not see this message,
repeat the steps above.
To pair cameras using the recorder:
Hover the mouse pointer near the top of an empty channel
and click .
You will then have 30 seconds to press and hold the pair
button on the back of your camera (shown above).
NOTE: If you do not see video from one or more cameras,
ensure you have removed the PLEASE REMOVE label
from the power pack. If the issue persists, see the
"Troubleshooting" section on the back of this document.
Visit us online for up-to-date software and complete instruction manuals.
1
2
3
4
As our products are subject to continuous improvement, Lorex reserves the right to modify product design,
specifications and prices, without notice and without incurring any obligation. E&OE. All rights reserved.
DEVICE ID: xxxxxxxxxxxxx
A Ensure Device ID is selected.
Tap to scan the QR code on the back
B
F
of your recorder using the camera on
your mobile device.
Ensure the Client Port reads 35000.
C
Enter the username (default: admin).
D
Enter the password (default:
E
00000000).
F Tap Save.
2. Tap PAIR. A timer 3. Press and hold the pair button on the
for 30 seconds back of the camera for 3 seconds.
appears.
LWB3800 / LWB3900 Series
Need Help?
Visit lorextechnology.com
Search for the model number
of your product
Click on your product in the
search results
Click on the Downloads tab
Copyright © 2020 Lorex Corporation
LHB800_QCG_EN_R3