JVC KW-NX7000 Instructions Manual page 52

Subscribe to traffic services.
1&
[47]
Selectable settings, [reference pagel
Edit the voice message at startup/shutdown of the System.
• To edit the message, press
[Edit],
enter the message, then press
[OK].
You can listen to the edited message by pressing
[Test].*3
( The procedure for setting an item is shown on page 16. )
Initial: Underlined
Select this to update your map database using an SD card.
• When you press
[Open the Front Panel],
the front panel opens. Press
[Cancel]
to cancel the operation.
• For details about updating your unit, visit <http://www.jvc-exad.com>
(English website only).
The Navigation System is gradually optimized by automatic calibration.
Reset the calibration data in the following cases:
• When you reinstall the unit in another car.
• When you replace or rotate the tires.
Once this is carried out, the calibration data is cleared.
• When you press
[Reset],
aconfirmation message appears. Press
[Yes]
to confirm the operation. Press [No] to cancel.
Initializes all your settings.
• When you press
[Restore],
aconfirmation message appears. Press
[Yes]
to confirm the operation. Press [No] to cancel.
Favorite*l:
Initializes the list of your favorite points.
1&
[24]
Previous*l:
Initializes the list of previous destinations and via points.
1&
[36]
Home*l:
Initializes the registration of your home.
1&
[24]
If you find your current position displayed on awrong place on the map,
use this setting to correct your position.
• To change your position, move the cursor to the position where you
want to set as current position and press
[OK],
then adjust the direction
by pressing
[8]/(6]
and press
[OK].
Function Menu-Map Settings (continued)
*1
Selectable only when atleast one place is registered.
*2
You cannot use Cyrillic characters for the message.
*3
For entering the characters,
1&
page 28.
52