Basic Operations; Remote Controller (Rm·rk250) - JVC KW-NX7000 Instructions Manual

To turn off the AV function
• If the map is displayed, switch the screen to the AV
screen by pressing DISP.
• To activate the AV function:
For the operations on the AV screen
I8F
page 58
Basic operations -
Remote controller (RM-RKZSO)
Installing the battery
Insert the batteries into the remote controller by
matching the polarity (+ and -) correctly.
Battery shall not be exposed to excessive heat such
as sunshine, fire or the like.
• If the range or effectiveness of the remote controller
decreases, replace both batteries.
11
Before using the remote controller:
• Aim the remote controller directly at the remote
sensor on the unit.
• DO NOT expose the remote sensor to bright light
(direct sunlight or artificial lighting).
The unit is equipped with the steering wheel
remote control function .
• See the Installation/Connection Manual (separate
volume) for connection.
INTRODUCTION