Operate The Voice Library; Loading The Voice Library - Hammond SK1 Owner's Manual

LOADING THE VOICE LIBRARY

1
Insert the USB fl ash drive to the USB FLASH DRIVE jack.
Wait until the display "Confirming
wait..." disappears.
2
MENU/
EXIT
UPPER
PLAY
NUMBER
Display the menu with the [MENU/EXIT] button.
3
UPPER PEDAL LOWER
NUMBER NAME
PATCH
Select the Page E with the [ ],[ ] button.
4
UPPER PEDAL LOWER
NUMBER NAME
PATCH
Select LIBRARY with the [ ] button.

OPERATE THE VOICE LIBRARY

USB
FLASH DRIVE
USB. Please
VALUE
PEDAL LOWER
NAME
PATCH
VALUE
ENTER
VALUE
ENTER
5
UPPER PEDAL LOWER
NUMBER NAME
PATCH
Press the [ENTER] button. Now you have come to the library
function mode.
6
UPPER PEDAL LOWER
NUMBER NAME
PATCH
Select the voice library you want to additionally register with
the [VALUE] knob or the [ ],[ ] buttons.
NOTE: The capacity of the sound library fi le on the upper right of the
display, and the remaining capacity of this unit on the bot-
tom right. You can not additionally register larger fi les than
the remaining capacity.
7
UPPER PEDAL LOWER
NUMBER NAME
PATCH
Press the [ENTER] button. Loading the voice library starts. It
may take a while for this procedure to complete.
Required time for registration depends on the capacity. It takes
a maximum of 3 hours.
133
VALUE
ENTER
VALUE
ENTER
VALUE
ENTER
Voice Library