Engine Oil Change - KYMCO B&W 150 Owner's Manual

(6) ENGINE OIL CHANGE

1.Place the motorcycle on its main stand on level ground.
2.Remove the oil dipstick.
3.Remove the drain bolt to drain the oil.
4.Refill fresh engine oil for 0.9 liter. Firmly tighten the oil
dipstick.
5.Warm up the engine and check the oil level again after the
～
engine is stopped for 20 30 seconds.
Specified Oil: SAE 15W40
Capacity/Exchanging Capacity:1.1L/0.9L
CAUTION:
When changing the engine oil, also clean the oil strainer
and reinstall it.
Use the specified engine oil.
Change engine oil at first 300km and then change it at
every 2000km.
Engine oil will deteriorate easily and require more frequent
change if the motorcycle is often ridden in dusty and cold
areas or ridden for short distance.
Do not mix engine oil of different classes or viscosities. It
may cause damage to the engine.
Drain Screw
34
Oil Strainer