Cisco Catalyst 4500 Series Command Reference Manual page 694

show diagnostic content
module 6:
Diagnostics test suite attributes:
P/V/* - Per port test / Per device test / NA
D/N/* - Disruptive test / Non-disruptive test / NA
ID
==== ========================================== ============ =================
1) linecard-online-diag --------------------> **D****I**
Switch#
Related Commands Command
show diagnostic result module
show diagnostic result module
test 2
show diagnostic result module
test 3
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
2-636
B/* - Basic ondemand test / NA
S/* - Only applicable to standby unit / NA
X/* - Not a health monitoring test / NA
F/* - Fixed monitoring interval test / NA
E/* - Always enabled monitoring test / NA
A/I - Monitoring is active / Monitoring is inactive
m/* - Mandatory bootup test, can't be bypassed / NA
o/* - Ongoing test, always active / NA
Test Name
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Attributes
Description
Displays the module-based diagnostic test results.
Displays the results of the bootup packet memory test.
Displays the results from the ongoing packet memory test.
Testing Interval
(day hh:mm:ss.ms)
not configured
OL-25342 -01