Table of Contents
Advertisement
Connection
2. Turn the C-Mount lens clockwise to install it.
3. Set focus of camera using Back Focus Control Lever of camera side after combining
C-Mount lens.
Note that C-Mount adaptor is not supplied with camera.
When Install a CS-Mount lens
Remove the protective cover from the front of
the camera, and turn the CS-Mount lens
clockwise to install it. And set focus of camera
using Back Focus Control Lever of camera side
after combining CS-Mount lens.
Use the lens connector shown in the following
figure. If the dimensions of the connector are
not correct, it may damage the camera, or the
lens may not be installed firmly.
If the lens is too heavy, the camera becomes
unbalanced and there may be problems. Use
a lens that weighs less than 450g.
14_ Connection
C-Mount Adapter
C-Mount Lens: 10mm or less
CS-Mount Lens: 5mm or less
Advertisement
Table of Contents
