Seat Recline - Valco baby TRI MODE EX Product Reference Manual

OPeNING yOUR sTROlleR cont'd
M
FIGURE M
32. Press down on the side locking hinges (on the basket)
to lock the frame in the open position.
33. Secure the handle to the frame by engaging the
locking clamps on both sides.
ALWAYS TEST THAT ALL LATCHES AND LOCKS ARE

seaT ReClINe

N
Your recline system offers an almost infinite amount of seat
adjustments.
FIGURE N
34. RECLINE: While squeezing the centre release
mechanism in a pincer action, ease the seat down to
the desired position.
35. INClINe: Place your hand in the centre of the rear of the
seat.
36. Pull the incline strap while gently pushing on the rear
of the seat until the desired position has been reached.
IMPORTANT: ALWAYS TEST THAT THE SEAT IS SECURELY
O
UsING yOUR bRaKes
FIGURE O
37. Press the centre toggle down firmly with your foot until
you feel the wheels have locked.
38. To release, lift the centre toggle from beneath with
your foot.
IMPORTANT: ALWAYS TEST THAT THE BRAKE IS FULLY ENGAGED
INsTallING THe exPaNDa HOOD
P
FIGURE P
39. Place the plastic hood housings over the
corresponding housing on either side of the stroller
frame.
40. Align the straight track on the stroller housing with the
corresponding channel in the hood housing.
41. Slide the hood housing downward, engaging the track
fully in the hood channel so it fully engages onto the
stroller frame.
IMPORTANT WARNING:
SECURELY ENGAGED BEFORE USE.
LOCKED IN PLACE
WHEN ACTIVATED