Behringer Xenyx 1002FX User Manual
  1. Manuals
  2. Brands
  3. Behringer Manuals
  4. Music Mixer
  5. XENYX 1002FX
  6. User manual

Behringer Xenyx 1002FX User Manual

Hide thumbs Also See for Xenyx 1002FX:
Table of Contents

Advertisement

Quick Links

See also: User Manual
User’s Manual
Version 1.0 January 2006

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Xenyx 1002FX and is the answer not in the manual?

Questions and answers

Related Manuals for Behringer Xenyx 1002FX

Summary of Contents for Behringer Xenyx 1002FX

  • Page 1 User’s Manual Version 1.0 January 2006...

  • Page 2: Important Safety Instructions

    XENYX 1002FX/1202FX IMPORTANT SAFETY INSTRUCTIONS DETAILED SAFETY INSTRUCTIONS: 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. CAUTION: To reduce the risk of electric shock, do not remove 5) Do not use this apparatus near water.

  • Page 3: Table Of Contents

    XENYX 1002FX/1202FX FOREWORD TABLE OF CONTENTS Dear Customer, 1. INTRODUCTION ............4 I’m sure you’re one of those people who have 1.1 General mixing console functions ........4 devoted themselves 1.2 The user’s manual ............4 body and soul to your 1.3 Before you get started ...........

  • Page 4: Introduction

    The equalizers used for the XENYX Series are based on the legendary circuitry of top-notch consoles made in Britain, which The interface of BEHRINGER mixing consoles is optimized for are renowned throughout the world for their incredibly warm these tasks, enabling you to easily keep track of the signal path.

  • Page 5: Before You Get Started

    XLR connector and also features switchable +48 V Should your BEHRINGER product malfunction, our goal is to phantom power supply for condenser microphones. The XENYX have it repaired as quickly as possible. To arrange for warranty...

  • Page 6: Stereo Channels

    XENYX 1002FX/1202FX TRIM CLIP The CLIP-LED’s of the mono channels illuminate when the Use the TRIM control to adjust the input gain. This control should always be turned fully counterclockwise whenever you input signal is driven too high, which could cause distortion. If this happens, use the TRIM control to reduce the preamp level connect or disconnect a signal source to one of the inputs.

  • Page 7: Connector Array Of The Main Section

    (e.g. CD player, tape deck, etc.) into the console. They can also be used as a standard stereo line input, so the output of a second XENYX or BEHRINGER ULTRALINK PRO MX882 can be connected. Alternatively the line or tape output of a hi-fi amplifier...

  • Page 8: Digital Effects Processor

    This is why, for example, a Hi-Hat should only be driven as far 100 FIRST-CLASS EFFECTS as -10 dB. Snare drums should be driven to approx. 0 dB. The XENYX 1002FX/1202FX features a built-in digital stereo The CLIP-LED’s of your XENYX display the level effects processor. This effects processor offers a large number virtually independent of frequency.

  • Page 9: Applications

    XENYX 1002FX/1202FX 3. APPLICATIONS 3.1 Recording studio Fig. 3.1: The 1002FX in a recording studio Even though most of the tasks in a studio can nowadays be the phones bus or the control room bus to monitor not the main accomplished using a computer, a mixing console remains an mix signal (i.e.

  • Page 10: Live Sound

    XENYX 1002FX/1202FX 3.2 Live sound Fig. 3.2: Live application of the 1202FX This illustration shows a typical arrangement for a live setup. If you are using an external effects processor (wired as Two vocal microphones and the line outputs of a guitar and a shown in the illustration), please make sure that the FX SEND bass amplifier are connected to the mono channels of the 1202FX.

  • Page 11: Installation

    XENYX 1002FX/1202FX 4. INSTALLATION 4.1 Mains connection AC POWER IN Connect the power supply to the 3-pin mains connector on the rear of the console. Use the AC adapter supplied to connect the console to the mains. The adapter complies with all applicable safety standards.

  • Page 12: Specifications

    Max. output level +22 dBu Control room outputs Type ¼" TRS connector, unbalanced BEHRINGER is constantly striving to manintain the highest professional approx. 120 W Impedance standards. As a result of these efforts, modifications may be made from Max. output level +22 dBu time to time to existing products without prior notice.

  • Page 13: Warranty

    Colours and specification may vary slightly from product. Products are sold through our authorised dealers only. Distributors and dealers are not agents of BEHRINGER ®...

This manual is also suitable for:

Xenyx 1202fx

Table of Contents