Behringer XENYX 1002B User Manual
Ultra low-moise design 10-input, 2-bus mic/line mixer
Hide thumbs
Also See for XENYX 1002B:
- Quick start manual (16 pages) ,
- User manual (12 pages) ,
- Operating/safety instructions manual (12 pages)
Table of Contents
Advertisement
User Manual
Thank you
Thank you for choosing the XENYX 1002B 10 input mixer. This mixer
is packed with features like ultra low-noise XENYX mic preamps,
neo-classic "British" 3-band EQs, and stereo channels that allow
simultaneous mic and line input use, as well as both monitor and
FX sends on each channel. The 1002B can also operate on battery
power, a unique feature that allows you to record or perform on
the go or outdoors. The 1002B delivers everything you expect
from a powerful, small-format mixer. From broadcasting and video
dubbing to full band performance and recording, this versatile
piece of gear works wonders in a variety of applications.
This manual is available in English, German, Spanish and
Chinese. Download them by going to the appropriate product
page at:
www.behringer.com
XENYX 1002B
Ultra low-noise design,
10-input, 2-bus mic/line mixer
with optional battery
operation
Table of Contents
Thank you ..................................................................... 1
Important Safety Instructions ................................... 2
1. Before You Get Started ........................................... 3
2. Audio Connections ................................................. 4
3. Controls and Connectors ...................................... 5
4. Gain Setting ............................................................. 6
5. Applications ............................................................ 8
6. Specifications .......................................................... 9
Limited waranty ......................................................... 11
Legal Disclaimer ........................................................ 12
Advertisement
Table of Contents
Related Manuals for Behringer XENYX 1002B
Summary of Contents for Behringer XENYX 1002B
-
Page 1: Table Of Contents
Thank you Table of Contents Thank you ..............1 Thank you for choosing the XENYX 1002B 10 input mixer. This mixer Important Safety Instructions ........2 is packed with features like ultra low-noise XENYX mic preamps, 1. Before You Get Started ........... 3 neo-classic “British”... -
Page 2: Important Safety Instructions
XENYX 1002B User Manual Important Safety Instructions Clean only with dry cloth. [ 6 ] Do not block any ventilation openings. Install in accordance [ 7 ] with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat... -
Page 3: Before You Get Started
XENYX 1002B User Manual Before You Get Started Basic Operation The XENYX 1002B is easy to use. Simply follow these steps to Shipment achieve the best possible sound: Your XENYX 1002B was carefully packed at the factory and the Plug the included power cable into the back of the mixer. -
Page 4: Audio Connections
XENYX 1002B User Manual Audio Connections Strain relief clamp Sleeve input Sleeve (ground/shield) 1 = ground/shield 2 = hot (+ve) 3 = cold (-ve) output (signal) Unbalanced ¼" TS connector Fig. 2.3: ¼" Unbalanced For unbalanced use, pin 1 and pin 3 have to be bridged... -
Page 5: Front Panel Controls/Connectors
XENYX 1002B User Manual Controls and Connectors Front Panel – Plug a microphone into this input using an XLR cable. channel in the stereo field. [ 1 ] – Plug a line-level source into this jack using a ¼" – Adjusts frequencies above 10 kHz by +- 15 dB. -
Page 6: Gain Setting
XENYX 1002B User Manual – Connect to the inputs of a power amp or for use with condenser microphones. When used with MAIN OUTPUT [ 1 8] powered speakers using ¼" TS cables. batteries, 18V of power is supplied. – Connect to the input of an external effects –... -
Page 7: Using External Effects
XENYX 1002B User Manual Using External Effects Creating a Monitor Mix The 1002B lets you use external effects processors to add a touch For live applications, audio engineers often send different mixes of reverb, delay, or other effects to various channels. Use the to the audience and to the performing musicians. -
Page 8: Applications
XENYX 1002B User Manual Battery Installation The 1002B can be powered by three 9V batteries. This feature allows you, for example, to capture a high-quality recording XM1800S while sitting on the beach with your laptop. You’re no longer tethered by an electrical outlet. You can still record with con-... -
Page 9: Specifications
XENYX 1002B User Manual Specifications DSP2024P DSP2024P Mono inputs XM1800S Microphone inputs (XENYX Mic preamp) Type XLR connector, electronically balanced, discrete input circuit Mic E.I.N.1 (20 Hz - 20 kHz) HPS5000 @ 0 Ω source resistance -134 dB 135.7 dB A-weighted @ 50 Ω... - Page 10 XENYX 1002B User Manual Main outputs Type ¼" TRS jack, electronically balanced Impedance 240 Ohms balanced, 120 Ohms balanced Max. output level +28 dBu Phones output Type ¼" TRS jack, unbalanced Max. output level +19 dBu / 150 Ohms (+25 dBm)
-
Page 11: Limited Waranty
BEHRINGER’ s website www. behringer. com under “Where to Buy”, or you can contact developed and manufactured, this modi cation/adaptation shall not be considered the BEHRINGER o ce closest to you. -
Page 12: Legal Disclaimer
BEHRINGER’ s limited warranty, please see complete details online at www. behringer. com. * BEHRINGER Macao Commercial Off shore Limited of Rue de Pequim No. 202-A, Macau Finance Centre 9/J, Macau, including all BEHRINGER group companies... - Page 13 INFORMATION Important information: Changes or modifications to the equipment not expressly approved by BEHRINGER USA can void the user’s authority to use the equipment. XENYX 1002B Responsible party name: BEHRINGER USA, Inc. Address:...
- Page 14 This manual is available in English, German, Spanish and Chinese. Download them by going to the appropriate product page at: www.behringer.com...
Need help?
Do you have a question about the XENYX 1002B and is the answer not in the manual?
Questions and answers