Electrical Service Guide; Selecting A Location And Connecting Input Power - Craftsman 117.205710 Operator's Manual

2-10. Electrical Service Guide

Input Voltage
Input Amperes At Rated Output
Max Recommended Standard Fuse Or Circuit Breaker Rating In
Amperes
Min Input Conductor Size In AWG/Kcmil
Max Recommended Input Conductor Length In Feet (Meters)
Min Grounding Conductor Size In AWG/Kcmil
Reference: 1996 National Electrical Code (NEC).

2-11. Selecting A Location And Connecting Input Power

18 in (457 mm) of
space for airflow
Y Do not move or operate unit
where it could tip.
Y Always connect grounding
conductor first.
= GND/PE
1
1
200
30
45
10
97 (29)
10
5
L1
L2
2
4
L2
230
26
40
10
128 (39)
10
1 Rating Label
Supply correct input power.
2 Plug
3 Receptacle
Connect plug to receptacle.
4 Input And Grounding
Conductors
Connect directly to line disconnect
device if hard wiring is required.
5 Line Disconnect Device
See Section 2-10.
Y Special installation may be
required where gasoline or
volatile liquids are present –
see NEC Article 511 or CEC
Section 20.
3
L1
230 VAC, 1
ST-801 568
OM-194 199 Page 10
S-0092-J