Safety Precautions - Kenwood VR-506 Instruction Manual

Units are designed for operation as follows
U S A and Canada AC 120 V only
Australia AC 240 V only
Europe and U K AC 230 V only
China and Russia
AC 220 V only
*Other countries AC 11 O-l 20 I 220-240 V switchable
* AC voltage selection
TheACvoltageselectorswitch on the rear panel isset tothevoltagethat
prevails rn the area to which the unit is shopped Before connecting the
power cord to your AC outlet, make sure that the setting position of thus
switch matches your line voltage If not, it must be set to your voltage
in accordance with the following direction
AC voltage selector switch
Move swatch lever to
match your line voltage
with a small screw-
driver or other pornted
too1
Note:
Qur warranty does not cover damage caused by excessive line voltage
due to improper settrng of the AC voltage selector switch
Safety precautions
WARNING :
TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE
A
AL
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS IN-
SIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL,
WlTHlNANEQUILATERALTRIANGLE.ISlNTENDEDTOALERT
THE USER TO THE PRESENCE OF UNINSULATED "DAN-
GEROUSVOLTAGE" WITHIN THE PRODUCT'S ENCLOSURE
THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTI-
TUTE A RISK OF ELECTRIC SHOCK TO PERSONS
a
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRI-
ANGLE IS INTENDED TO ALERT THE USER TO THE PRES-
ENCE OF IMPORTANT OPERATING AND MAINTENANCE
(SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOM-
PANYING THE APPLIANCE
Unpacking
Unpack the unit carefully and make sure that all accessories are put aside
so they will not be lost
Examine the unit for any possibility of shipping damage if your unit is
damaged or fails to operate, notify your dealer immediately If your unit
was shipped to you directly, notify the shipping company without delay
Only the consignee (the person or company receiving the unit) can file a
clarm against the carrier for shrpping damage
We recommend that you retain the original carton and packing materials
for use should you transport or ship the unit in the future
Keep this manual handy for future
reference
L
Accessories
FM Indoor antenna (I) AM loop antenna (1)
-__-----_---------
For W-506 and KRF-V6050D
Remote control unit (1) Batteries (RG/AA) (2)
RC-R0615
--
For VR-505 and KRF-V5050D
Remote control unit (1)
RC-R0511
Batteries (RG/AA) (2)
------------------
For W-517 and
KRF45550D
Remote control unit (1)
RCRO617
Batteries (RB/AA) (2)
(jyEJEJJ) e
'AC plug adaptor (1)
*Use to adapt the plug on the powt
cord to the shape of the wall outlet
(Accessory only for regrons where us
IS necessary)
Microcomputer malfunction 3
Ifoperation isnot possibleoran erroneousdisplayappears even though
all connectrons have been made properly, reset the microcomputer
referring to "In case of difficulty"
In regard to contact cleaner
Do not use contact cleaners because It could cause a malfunctron
Be specrally careful not to use contact cleaners containing or/, for
they may deform the plastic component
I :