4.
Remove the optical drive (3) from the computer.
5.
If it is necessary to replace the optical drive bracket, position the optical drive with the rear toward
you.
6.
Remove the three Phillips screws (1) that secure the optical drive bracket to the optical drive.
7.
Remove the optical drive bracket (2).
Reverse this procedure to install an optical drive.
Upgrade bay hard drive
Description
Upgrade bay bezel
Before removing the upgrade bay hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
78
Chapter 4 Removal and replacement procedures
Spare part number
655547-001
Need help?
Do you have a question about the EliteBook 8570w and is the answer not in the manual?
Questions and answers