Note: You must reset the bounce-back
feature for the power windows. See Power
Windows (page 53).
Make sure that you dispose of
old batteries in an
environmentally friendly way.
Seek advice from your local authority
about recycling old batteries.
CHECKING THE WIPER
BLADES
Run the tip of your fingers over the edge of
the blade to check for roughness.
Clean the wiper blades with washer fluid
or water applied with a soft sponge or
cloth.
CHANGING THE WIPER
BLADES
Windshield Wiper Blades
Note: The windshield wiper blades are
different in length. See Technical
Specifications (page 169). If you install
wiper blades of the wrong length, the rain
sensor may not work correctly.
B-MAX (CB2) Vehicles Built From: 25-06-2012, Vehicles Built Up To: 31-12-2013
Maintenance
Changing the Windshield Wiper Blades
1.
Press the locking buttons together.
2. Rotate and remove the wiper blade.
3. Install in the reverse order.
Note: Make sure that the wiper blade locks
into place.
Rear Window Wiper Blade
1.
Lift the wiper arm.
2. Position the wiper blade at right angles
to the wiper arm.
3. Disengage the wiper blade from the
wiper arm.
4. Remove the wiper blade.
5. Install in the reverse order.
160
Need help?
Do you have a question about the B-MAX and is the answer not in the manual?
Questions and answers
To change the drivers arm rest I need to remove the seat belt that is part of the seat, so that I can get inside the seat. How the hell do I do that? There is no help anywhere on line