Table of Contents
Advertisement
Signal Check
Changes in the signal status are displayed on the screen as they arise.
When Mode Display is set to ON,
the input signal is switched or
when the RECALL button is
pressed.
When the sync signal is no longer
detected.
When the input signal does not
match the monitor specifications
or is in an unstable status.
Power Save Mode
When the RGB1, RGB2 input is selected
• When this unit is connected to a VESA DPMS computer, the Power Save (Off) mode can be set to be activated automatically when the
Returning to operating status
• Operate the personal computer, or press either the INPUT SELECT button of the main unit or the RGB1/RGB2 buttons of the remote control.
Downloaded from
www.Manualslib.com
OTHER FEATURES (continued)
Status
Display
A guide is displayed for the input
terminal and the horizontal and
vertical sync frequency.
• A guide displays No Sync.
Signal, and Power Save (for
approx. 5 sec.)
• When the condition continues
where the sync signal cannot be
detected, indicator lamp of
power source changes in
orange and the mode switches
to power save mode.
A guide displays Invalid Scan
Freq.
computer is not being used to reduce power consumption by this unit.
Horizontal
RGB sync signal
Vertical
PC signal
Operation mode
Indicating lamp
Power consumption
manuals search engine
Action
Recheck the personal computer
power switch status and the
connection status.
Recheck the input signal
specifications.
Yes
No
Yes
Yes
Active (normal display)
Blank (no display)
On
Lights green
3W or less (RGB1)
255W (32")
1W or less (RGB2 ; 100V AC 120V)
365W (42")
3W or less (RGB2 ; 120V AC 240V)
RGB
RGB2
RGB
H : 48.4kHz
V : 60.1 Hz
-- -- Min.
OFF
-- -- : -- --
! No Sync. Signal
! Invalid Scan Freq.
Yes
No
No
No
Off
Lights orange
Advertisement
Table of Contents
