Cautions Concerning Usage - Sharp HV-50CXE Operation Manual

CAUTIONS CONCERNING USAGE

Be sure to follow the items described below to prevent damage, deterioration and trouble.
Do not block the intake and discharge
ports.
Blocking the intake port or
discharge port may cause
deformation and/or mal-
function as a result.
Do not place the unit on thick carpets,
thick blankets, etc.
The internal tem-
perature will rise and
may cause the sen-
sors to malfunction
as a result.
Do not place in a location exposed to
direct wind or in a location where unit
is in contact with wall, furniture, cur-
tains, ceiling, etc.
Staining and/or de-
formation may occur
as a result.
Place the unit at least 2m from televi-
sions, radios, electromagnetic clocks,
etc.
Electrical interfer-
ence or malfunction
of flow switch may
occur as a result.
Do not use at the location with high
humidity (about 70% or more).
Malfunction may
occur as a result.
6
At least 2m
of space
Do not place under direct sunlight or
near heating apparatus.
Deformation, discolora-
tion and/or malfunctions
of temperature and hu-
midity sensors and safety
mechanisms may occur
as a result. In addition,
the air within the tank
may expand, causing the
water to spill.
Take caution to freezing water.
If there is a risk of
water becoming fro-
zen, empty the wa-
ter within the tank
and tray. Using fro-
z e n w a t e r m a y
cause malfunction
to occur as a result.
Clean periodically.
Adhering of large
amounts of water
scaling may cause
malfunction to oc-
cur as a result.
Do not use other than tap water.
(Conventional tap water is sterilized with
chlorine to suppress propagation of bacte-
ria.)
• Using hot water of 40°C or higher, chemi-
cal agents, aromatic substances, dirty wa-
ter, etc. may cause deformation and/or mal-
function to occur as a result.
• Using mineral water, ionized alkaline wa-
ter, well water, purified water, etc., may
cause increased water scaling, creating an
environment for mold fungus and bacteria
to easily propagate.
Do not use the unit with the humidifi-
cation filter removed.
Malfunction may occur as a result.
Empty water when not in use.
When not in use, empty the water within the
tank and tray. Leaving water within the tank
and tray will cause mold fungus and bacte-
ria to easily propagate.