Quick Reference Guide - Sharp UX-510A Service Manual

Hide thumbs Also See for UX-510A:
Table of Contents

Advertisement

[5] Quick reference guide

ENTERING YOUR NAME AND NUMBER
Note: Imaging film and paper must be loaded to perform the following operation.
FUNCTION
1. Press:
3
Display shows: OWN NUMBER SET
START
2. Press:
3. Enter your fax number (max. of 20 digits) by pressing the number keys.
♦ To insert a space between digits, press the # key.
♦ If you make a mistake, press the SPEED DIAL key to backspace and clear the
mistake.
START
4. Press:
5. Enter your name by pressing the appropriate number keys as shown below.
♦ To enter two letters in succession that require the same key, press the SPEAKER
key after entering the first letter.
SPACE =
J =
A =
K =
B =
L =
C =
M =
D =
N =
E =
O =
F =
P =
G =
Q =
H =
R =
I =
S =
To change case, press the REDIAL key.
Press # or
to scroll through symbols and special characters.
START
6. When finished, press:
SETTING THE DATE AND TIME
Note: Imaging film and paper must be loaded to perform the following operation.
FUNCTION
1. Press:
3
Display shows: DATE & TIME SET
START
2. Press:
3. Enter two digits for the day (01 to 31).
4. Enter two digits for the month (01 to 12).
5. Enter four digits for the year (Ex: 2001).
6. Enter two digits for the hour (00 to 23)
and two digits for the minute (00 to 59).
START
7. When finished, press:
STORING AND CLEARING AUTO DIAL NUMBERS
Note: Imaging film and paper must be loaded to perform the following operation.
FUNCTION
1. Press:
3
Display shows: FAX/TEL # MODE
2. Press 1 to store a number or 2 to clear a number.
"
3. Enter a 2-digit number (from
01
will be the Speed Dial number. (If you are clearing a number, go to Step 7.)
4. Enter the full fax/telephone number.
START
5. Press:
6. Enter the name of the location by pressing number keys (Refer to the letter
entry table in ENTERING YOUR NAME AND NUMBER .)
START
STOP
7. Press:
T =
U =
V =
W =
X =
Y =
Z =
move
=
move
=
STOP
STOP
"
"
")
to
99
by pressing the number keys. This
SENDING FAXES
Normal Dialing
1. Lift the handset or press:
2. Dial the fax number.
3. Wait for the reception tone (if a person answers, ask them to press their Start
key).
START
4. Press:
Rapid Key Dialing
Press the appropriate Rapid Key (if the Rapid Key is from 20 to 38, press the
SHIFT key first).
Transmission will begin automatically.
Speed Dialing
SPEAKER
SPEED
DIAL
1. Press:
HOLD/
SEARCH
2. Enter 2-digit Speed Dial number.
START
3. Press:
RECEIVING FAXES
Press the RECEPTION MODE key until the appears in the display points to the
desired reception mode.
FAX mode: The fax machine automatically answers on two rings and receives
the incoming document.
TEL mode:
TEL/FAX mode: This mode is convenient for receiving both faxes and voice calls.
When a call comes in, the fax will detect whether it is a voice call (including manu-
ally dialed fax transmissions), or an automatically dialed fax.
A.M. mode: Select this mode when an answering machine is connected to the fax
and the answering machine is turned on.
1 – 9
Place your document (up to 20 pages)
face down in the document feeder.
SPEAKER
TEL
05 - NOV 10:30
TEL/FAX
RECEPTION
TEL
MODE
05 - NOV 10:30
TEL/FAX
TEL
05 - NOV 10:30
TEL/FAX
TEL
05 - NOV 10:30
TEL/FAX
Beep
RECEIVING
UX-510ATH
FO-1470TH
FAX
A.M.
FAX
A.M.
FAX
A.M.
FAX
A.M.
START

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fo-1470Ux-510athFo-1470th

Table of Contents