Tascam CD-RW901MKII Owner's Manual

Tascam CD-RW901MKII Owner's Manual

Professional cd rewritable recorder
Table of Contents

Advertisement

Quick Links

D01217120B
CD-RW901
"
)
CD Rewritable Recorder
Professional
OWNER'S MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CD-RW901MKII and is the answer not in the manual?

Questions and answers

Summary of Contents for Tascam CD-RW901MKII

  • Page 1 D01217120B CD-RW901 " CD Rewritable Recorder Professional OWNER'S MANUAL...
  • Page 2: Important Safety Precautions

    IN USA/CANADA, USE ONLY ON 120 V SUPPLY. DECLARATION OF CONFORMITY We, TEAC EUROPE GmbH. Bahnstrasse 12, 65205 Wiesbaden-Erbenheim, Germany declare in own responsibility, the TEAC product described in this manual is in compliance with the corresponding technical standards. TASCAM CD-RW901MKII...
  • Page 3: Important Safety Instructions

    CAUTION normally, or has been dropped. • Leave 1U of space above the unit for ventilation. • Allow at least 10 cm (4 in) at the rear of the unit for ventilation. TASCAM CD-RW901MKII...
  • Page 4: Safety Information

    Less than 131.9mW (CD) and 147.8mW (DVD) on the objective lens Wavelength: 785nm (CD) typical 661nm (DVD) typical Standard: IEC60825-1: 2007 For China “仅适用于海拔2000m以下地区安全使用” “仅适用于非熱帯气候条件下安全使用” “環境保護使用年限” 产品有毒有害物质或元素的名称及含量 机种 : CD-RW901MKII 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 品名 (Pb) (Hg) (Cd) (Cr6+)
  • Page 5: Table Of Contents

    Synchronized recording ........28 Control connections ..........9 Sync recording .............28 Sync recording with trim function .....29 2 − Features of the CD-RW901MKII ..10 Automatic track division ....... 29 Front panel ............ 10 To enable or disable automatic track division: ..29 Rear panel ............11 Automatic track division with trim function..30...
  • Page 6: Introduction

    Under no circum- to properly set up and connect the CD-RW901MKII, as well stances will TEAC Corporation be responsible for the as the operation of its many useful and convenient functions.
  • Page 7: About Cd-R And Cd-Rw Discs

    CD-RW disc may not play back satisfactorily on every audio CD player. It will, naturally, be playable on the CD-RW901MKII. This is in no way a limitation of the CD-RW901MKII itself, but of the difference between the different types of media and the methods used to read them.
  • Page 8: Environmental Considerations

    1 − Introduction Environmental considerations The CD-RW901MKII may be used in most areas, but to electrical device such as a power amplifier. maintain top performance, and prolong operating life, observe • Make sure that the unit is mounted in a level position for the following environmental conditions: correct operation.
  • Page 9: Beware Of Condensation

    SKIP (forward) IN SKIP (back) IN EOM TALLY OUT REC IN CALL IN PLAY TALLY OUT PAUSE TALLY OUT FADER START/STOP STOP IN PLAY IN PAUSE IN a: The maximum current supplied from this terminal is 50 mA. TASCAM CD-RW901MKII...
  • Page 10: Features Of The Cd-Rw901Mkii

    2 − Features of the CD-RW901MKII Front panel POWER switch PITCH control The power switch is used to switch Push this control to set the Pitch the unit on and off. Control on and off. Turning this control adjusts the value within ±16.0%.
  • Page 11: Rear Panel

    PS/2 interface can be connected to this terminal to in the following modes selected in the sub-menu. enable certain operations of the CD-RW901MKII with Index: When in playback or ready mode, using this key the keyboard. Title input operations, in particular, can searches indexes forwards within a track..
  • Page 12: Display

    These XLR connectors accept analog audio signals at +4 dBu from suitably-equipped units, allowing control of the suitably-equipped units. CD-RW901MKII. The pinouts of this connector are described (see Connections” on page 9). The wirings are: 1=grounding, 2=hot, 3=cold. REMOTE IN terminal...
  • Page 13: Rc-Rw901 Remote Control Unit

    2 − Features of the CD-RW901MKII ANALOG DISC, GROUP, TRACK display indicator lights up when the input indicator ANALOG DISC source is connected to unbalanced analog input. lights up when a disc loaded and is stopped. The indicator blinks when the input source is connected...
  • Page 14 2 − Features of the CD-RW901MKII recording on and off (see “Synchronized recording” on page 28 for details). ∆ / ˚ SEARCH keys ( Use these keys to move the playback position inside a track. keys Use these keys to move SKIP ( Â/¯...
  • Page 15: Menu Operation

    3 − Menu operation The various settings and editing operations possible with the CD-RW901MKII are performed through menu options shown on the display. Among the many menu setting options, some may be made directly using the keys on the remote control.
  • Page 16: Operation Basics

    If the sub-menu PLAY MODE is selected, the menu item shows up like this: NOTE To return to the sub-menu option selection screen, press the ESCAPE key on the front panel or the CLEAR key on the remote control. TASCAM CD-RW901MKII...
  • Page 17: Playback Operations

    CD-R discs and CD-RW discs that have been recorded on the unit. Discs for playback The CD discs in the CD-RW901MKII can play back the types MP3 files recorded in ISO9660 level 1 and level 2 •...
  • Page 18: Selecting By Track Number

    The direct search function cannot be used in program or random mode. For MP3 discs, time cannot be specified within a track. However, if you input the three-digit track number, playback will begin from the start of that track. TASCAM CD-RW901MKII...
  • Page 19: Index Search

    Mode>Cont®Mode>Single®Mode>Program®Mode>Random Continuous playback PLAY 2. Press the key to begin playback in order of Programing is cancelled, and playback continues in the normal order. the track number. 1. When stopped, set the mode to display Continue Mode>Cont TASCAM CD-RW901MKII...
  • Page 20: Single-Track Playback

    The track number will be entered into the program. In this mode, if there are no tracks programed, the CD-RW901MKII will not start playback. Repeat the above step 2 until the desired program is completed. As the program is being created, the program number and total If an attempt is made to enter more than 100 program program playing time is revised on the display.
  • Page 21: Ext Sync Playback

    MP3 discs. the correct pitch. Timer playback By using an external timer, you can set the CD-RW901MKII 4. Set the timer to the desired time. Consult the to play the loaded disc automatically when the unit is turned timer’s operation manual for details. At the set on by the timer.
  • Page 22: A To B Repeat Playback

    â6 ã1 ã6 vibrating. This is a result of the key control algorithm working on the CD playback sound and is normal. MULTI JOG 3. Rotate the dial to select the desired key level and push to enter. TASCAM CD-RW901MKII...
  • Page 23: Auto Cue Function

    “ISRC” code on the screen. If there is no “ISRC” code on the disc or the code has not been recorded on the disc, I n c o m p l e t e ! will appears on the display. TASCAM CD-RW901MKII...
  • Page 24: Recorder Identification Data (Rid)

    Discs recorded in multiple sessions may also be played back. mp3. 9 CDs containing MP3s to be played by the CD-RW901MKII, have their contents must be within the following maximum limits: Number of directories: 255 Number of hierarchical structures: 8...
  • Page 25: Directory Playback Setting

    The display shows D e c o d e E r r ! . Stop When MP3 playback fails, the unit stops playback. The display shows D e c o d e E r r ! . TASCAM CD-RW901MKII...
  • Page 26: Recording

    Frequency conversion The sampling frequency for CDs is 44.1 kHz. The while recording or when in recording standby mode. CD-RW901MKII will always record (and play back) CDs at The digital signals other than 44.1kHz cannot be this frequency. recorded when SRC is off. The error message...
  • Page 27: Basic Recording

    (see “Finalizing” on page 33). show Fade Out . When the fade-out has finished, the display shows D i s c STOP key to exit. F u l l ! . Press the TASCAM CD-RW901MKII...
  • Page 28: Advanced Recording

    Starting playback of the source automatically starts recording begin automatically when a signal is received, and will stop on the CD-RW901MKII if Sync function is on (see “Sync when the signal ends. recording” below) and manual record start is disabled.
  • Page 29: Sync Recording With Trim Function

    The indicator blinks during A.TRACK recording or when in record ready mode. AUTO This function can be turned on by pressing the TRACK key on the remote control. Level TASCAM CD-RW901MKII...
  • Page 30: Automatic Track Division With Trim Function

    The display shows the Rec Mute flashing, the meters stop displaying the current level and the monitored sound is cut. After about four seconds, the unit enters record ready mode. NOTE This function is only available from the remote control unit. TASCAM CD-RW901MKII...
  • Page 31: Restricting The Number Of Tracks

    MULTI JOG dial to display the track numbers you want to record. The maximum number that can be entered is 99 tracks. Copy-protection The CD-RW901MKII allows copy-protection to be applied to the discs produced. Naturally, the copy-protection applies only to digital-to-digital copies. There are three settings: •...
  • Page 32: Continuous Recording (Cont Rec)

    5 − Recording Continuous recording (CONT REC) Using two CD-RW901MKII units to make continuous recording. If the number of tracks is restricted, the EOM tally signal is not output and the continuous recording Connect two CD-RW901MKII units using the cannot be operated.
  • Page 33: After Recording

    An unfinalized disc can always be distinguished on the Complete CD-RW901MKII by the TOC indicator under the disc type on display. the display being un-lit when the disc is inserted. NOTE To finalize a disc: During the finalizing process, all key presses are ignored.
  • Page 34: Erasing

    4. When the disc has been refreshed, appears Complete then will appear on the display. 2. Push the MULTI JOG dial or press the ENTER Blank Disc on the remote control to enter the function. The display shows S u r e ? TASCAM CD-RW901MKII...
  • Page 35: Titling

    MENU (+/-) keys on the remote control to select the STOP If you want to cancel, press the key. track number you wish to title. MULTI JOG ENTER 3. Push the dial or press the on the remote control. TASCAM CD-RW901MKII...
  • Page 36: Using A Keyboard With The Cd-Rw901Mkii

    Keyboard type setting Set the type using the sub-menu KEYBOARD option on The CD-RW901MKII must be set for the type of keyboard being connected. the SYSTEM sub-menu. Select US for an English-language keyboard, or JP for a Japanese-language keyboard.
  • Page 37: Data Settings

    8 − Data settings Data communication setting By connecting a PC through its RS-232C terminal to the CD-RW901MKII through its CONTROL I/O (RS-232C) terminal, the two units can be linked for data exchange. Use the following options on the SYSTEM sub-menu to perform their respective setting.
  • Page 38: Reference And Specifications

    Decode Err! The MP3 file cannot be played back. Format Err! The disc is in a format that the CD-RW901MKII cannot read. EXT CLK Err! Can not synchronize with the digital input clock from the selected source. Check the connection with the source unit.
  • Page 39: Troubleshooting

    While settings are retained each time they are made, in some case they will not be retained when the power is turned off too soon. To prevent this from happening, do not turn off the power right after making a setting. TASCAM CD-RW901MKII...
  • Page 40: Specifications

    230 VAC, 50Hz Australia 240 VAC, 50Hz Power consumption 17 W (U.S.A./Canada) 19 W (U.K./Europe/Australia) Dimensions (d x w x h) 309 x 482.6 x 94 (mm) / 12.2 x 19.0 x 3.7 (in) Weight 4.5 kg (9.9 lb) TASCAM CD-RW901MKII...
  • Page 41: Dimensional Drawing

    9 − Reference and specifications Dimensional drawing • Illustrations and other depictions may differ in part from the actual product. • Specifications and external appearance may be changed without notification to improve the product. TASCAM CD-RW901MKII...
  • Page 42 Notes TASCAM CD-RW901MKII...
  • Page 43 Ce produit est sujet aux réglementations concernant la garantie légale dans le pays d’achat. En cas de défaut ou de problème, veuillez Your unit must be serviced by an authorized TASCAM service station in Except as specified below, this warranty covers all defects in materials contacter le revendeur chez qui vous avez acheté...
  • Page 44 TEAC CORPORATION http://tascam.jp/ Phone: +81-42-356-9143 1-47 Ochiai, Tama-shi, Tokyo 206-8530 Japan TEAC AMERICA, INC. http://tascam.com/ Phone: +1-323-726-0303 7733 Telegraph Road, Montebello, California 90640 USA TEAC MEXICO, S.A. de C.V. http://teacmexico.net/ Phone: +52-55-5010-6000 Río Churubusco 364, Colonia Del Carmen, Delegación Coyoacán, CP 04100, México DF, México TEAC UK LIMITED http://tascam.eu/...

Table of Contents