Wohnbereich Funkstörungen versursachen; in this equipment. diesem Fall kann vom Betrieber verlang werden, angemessene Maßnahmen durchzuführen und dafür aufzukommen. CE Marking Information a) Applicable electromagnetic environment: E4 b) Peak inrush current: 12.5 A TASCAM CD-RW900...
PERSONNEL, AND DO NOT USE THE PRODUCT IN ITS DAMAGED STATE. � For USA Optical pickup: Type: SF-W37SFT Manufacturer: Sanyo Electric Co,Ltd. Laser output: Less than 0.7 mW on the objective lens (record) Wavelength: 760 to 800 nm TASCAM CD-RW900...
Welcome . Supplied accessories ≠ AAA batteries for the remote control unit....2 In addition to this manual, the CD-RW900 has been packed with the following: ≠ A rack-mounting screw kit (screws and washers) ..1 ≠ RC-RW900 remote control unit......... 1 Contact your TASCAM supplier if any of these items are missing.
CD player. It will, naturally, ≠ If you are in any doubt as to the care and handling of be playable on the CD-RW900. This is in no way a a CD-R disc, read the precautions supplied with the limitation of the CD-RW900 itself, but of the difference disc, or contact the disc manufacturer directly.
1-Introduction 1 − Introduction Environmental considerations The CD-RW900 may be used in most areas, but to ≠ Avoid installing this apparatus on top of any heat- maintain top performance, and prolong operating life, generating electrical device such as a power ampli- observe the following environmental conditions: fier.
Never use a disc that has had a stabilizer mounted to it. anism and cause it to malfunction. The residual adhesive may cause the disc to stick to the turntable of the CD-RW900. If it sticks to the turntable, you will need a technician to get it out. Beware of condensation If the unit (or a compact disc) is moved from a cold correct operation impossible.
2 − Features of the CD-RW900 Front panel r t y u i o p a s 1 POWER switch The power switch is used to switch page 18 for details. the unit on and off. w INPUT (L,R) controls Use these concentric con-...
STOP key Use this key to stop playback or record- with PS/2 interface can be connected to this termi- ing. nal to enable certain operations of the CD-RW900 with the keyboard. Title input operations, in particu- p PLAY key Use this key to start or resume playback lar, can be performed with greater efficiency.
1-Introduction 2 − Features of the CD-RW900 RC-RW900 Remote control unit 0 STOP key Use this key to stop playback or record- ing. q READY key Use this key to stands by playback or recording. w SYNC REC key Use this key to turn synchronized recording on and off (see “Synchronized recording”...
1-Introduction The various settings and editing operations possible ting options, some may be made directly using the keys with the CD-RW900 are performed through menu op- on the remote control. tions shown on the display. Among the many menu set- Menu configuration The menus are configured as shown below.
Page 14
Front panel operation: Use the MULTI JOG dial to select the desired menu item or value. Pushing the dial enters and exits menu mode. Remote control operation: Use the SKIP key to select. Pressing the ENTER key confirms and exits menu mode. TASCAM CD-RW900...
4−Playback operations The CD-RW900 can be used to play back CDs (includ- Audio files in MP3 format on CD-ROM, CD-R and CD- ing CD-R and CD-RW discs that have been recorded RW are also playable on the unit. and finalized on other types of recorder), as well as CD-R discs and CD-RW discs that have been recorded on the unit.
Example: To specify 1 min 00 sec from the start of track 2, input “002 001” NOTE NOTE ≠ If a point which does not exist is entered, setting op- Following the above example, if “0021” is input, the eration will be cancelled. same position will be located. TASCAM CD-RW900...
≠ If the total program playing time exceeds 999 min 59 NOTE sec, --- : -- appears on the display. If the CLEAR key is pressed, the programmed track will be deleted from the last. TASCAM CD-RW900...
The indicator flashes when a disc is not loaded into the turned on by the timer. unit. 1 First, plug the power cord of the CD-RW900 into the 4 Set the timer to the desired time. Consult the timer’ power outlet of the timer.
This is a result of a special process applied to CD playback 3 Rotate the MULTI JOG dial to select the desired key sound and is normal. level and push to enter. TASCAM CD-RW900...
In this manner, playback is performed from the top level played back. directories. For MP3 CDs to be played by the CD-RW900, the fol- lowing limitations have been placed on the number of About MP3 track data MP3 files and directories.
1-Introduction 5−Recording Before you start recording using the CD-RW900, make ≠ You can add tracks to an unfinalized recordable sure that you understand the following key points: disc. Once finalized, a CD-R disc is “fixed” and behaves in the same way as a pre-recorded disc.
(see “Finalizing” on page 25). (the display shows Fade Out). When the fade-out has finished, the display shows Disc Full! . Press the STOP key to exit. TASCAM CD-RW900...
Starting playback of the source automatically starts re- mode. The synchronization mode determines the auto- cording on the CD-RW900 if Sync ALL or Sync 1 has mated start and stopping of recording when a signal is been selected (see “Sync recording” below) and manual received.
When audio signal is not detected more than five sec- ≠ When the Sync ALL is on, and the READY key is onds, the CD-RW900 automatically will stop recording pressed, the unit enters recording standby mode and enters record standby mode.
While recording is in progress, press the REC MUTE key on the remote contorl. The display shows the Rec Mute flashing, the meters stop displaying the current level and the monitored sound is cut. After about four seconds, the unit enters record ready mode. TASCAM CD-RW900...
TOC flashing and the remaining time. The An unfinalized disc can always be distinguished on the unit starts counting down from a time shown on the CD-RW900 by the TOC indicator under the disc type on display. the display being un-lit when the disc is inserted.
Blank disc shows up. ERASE/DEL or the ERASE key again. 2 Push the MULTI JOG dial or press the ENTER key on the remote control to enter the function. The display shows Sure? TASCAM CD-RW900...
Now, you can input or edit the track title following 3 Press the MENU key to enter. the guidelines above. If you want to cancel, press the STOP key. 4 Press the MENU key to enter. If you want to cancel, press the STOP key. TASCAM CD-RW900...
PS/2 interface on the front panel to operate ficient for title input. Keyboard type setting The CD-RW900 must be set for the type of keyboard on the SYSTEM sub-menu. Select US for an English- being connected. language keyboard, or JP for a Japanese-language Set the type using the sub-menu KEYBOARD option keyboard.
Disc Repair The disc failed to write PMA is being repaired, and this operation will be a long- running. Please do not turn off the power of the CD-RW900 during this operation. PMA Writing The recorded content is being written to the disc.
120VAC, 60Hz Power U.K./Erope 230VAC, 50Hz Australia 240VAC, 50Hz Power consumption 16 W Dimensions w x h x d 482.6 x 94 x 307.6 (mm) Weight 4.9 kg (10.8 lb) Dimensional drawing 482.6mm(190.1") 465.6mm(183.3") 307.6mm(121.1") 435.0mm(171.3") 284.6mm(112.1") 16.6mm(6.5") 6.4mm(2.5") TASCAM CD-RW900...
Need help?
Do you have a question about the CD-RW900 and is the answer not in the manual?
Questions and answers