Ssid Setting - Samsung SMT-W5100E User Manual

SSID Setting

[MENU] 8. System Setting
1
If you select Auto at Step 1, SSIDs are automatically searched.
2
Select an SSID from the list of searched SSIDs.
- Ask the system administrator which SSID should be selected.
Select the Encryption Key
3
- If you have selected SSID Auto input at Step 1, you can register
the handset without entering the encryption key depending on
the encryption key setting on the AP(Access Point).
If an encryption key has not been enabled on the AP, Step 7 and
8 will be skipped and the user will be directed to the registration
screen automatically. If an encryption key has been enabled on
the AP, an automatic search will run to detect encryption mode,
and will switch to an input screen of the relevant mode.
- If the encryption mode is WEP: ASCII mode or HEX mode screen
will be displayed.
- If encryption mode is WPA_PSK or WPA2_PSK: TKIP/AES mode
is automatically recognized and an encryption input screen is
displayed.
- If Manual has been selected at Step 1, a screen is displayed as
shown to the right.
- As for its availability, refer to your system administrator.
- In case a WEP key has been enabled, select ASCII Mode or HEX
Mode to enter the WEP Key.
- In case a WPA_PSK or WPA2_PSK key has been enabled, select
AES Mode or TKIP Mode to enter the Encryption Key.
[OK]
(Select Auto/Manual)
mode.
Home Page
9. SSID Setting
[OK]
55
Table of Contents