Volume/Ring; Incoming Calls Tone - Samsung SMT-W5100E User Manual

Volume/Ring

Press the [Menu] button in idle mode, and then select the [4. Volume/Ring] icon.
You can press the

Incoming Calls Tone

Ring Type
You can select the modes of call sound such as the ring, vibration, ring after vibration and Light only.
[MENU] 4. Volume/Ring
1. Ring Type [OK]
For information about how to set the vibration mode, refer to the description of
'Setting the Vibration Mode' section in 'Basic Features' of this guide.
Ring Tone
This function enables you to select one ring melody out of a selection of 18 melodies.
[MENU] 4. Volume/Ring
2. Ring Tone [OK]
Ring Volume
This function enables you to adjust the ring volume.
[MENU] 4. Volume/Ring
3. Ring Volume [OK]
You can adjust the volume of the bell by using the [Volume] button.
in idle mode to perform the same function.
[OK] 1. Incoming calls tone
(Select ring type)
[OK] 1. Incoming calls tone
(Select melody)
[OK] 1. Incoming calls tone
(Select ring volume)
32
Home Page
[OK]
[OK]
[OK]
[OK]
[OK]
[OK]
Table of Contents