Electrical Specifications - Woodway Force Owner's Manual

Electrical Specifications

Electrical Requirements – Below are the standard electrical requirements, if you have
a different electrical configuration please contact your sales representative.
Power Requirements:
*20 Amp Dedicated line required (cannot share neutral line)
Reason: if you have 120 volts out of the wall outlet and more than one major appliance
on the hot or neutral line, the voltage will drop below 10% minimum of 120 volts and the
treadmill will shut off and reset.
Break Specifications:
Power Cord and Type:
Wall Outlet Requirements:
120 V ac:
208/220:
Main Fuse:
120 V ac:
208/220:
Heart Rate Pickup Assembly:
Pickup Range: Up to 30 inches
Heart Rate Range: Up to 200 beats per minute, uni-directional
Outlet Compatibility:
The 120 V ac input WOODWAY treadmill comes standard with a 3-prong plug (NEMA
520 P). The only outlet that the plug can be installed is a NEMA 5-20 R – which does
not share the neutral.
The 208 V or 220 V ac input WOODWAY treadmill has a 3-prong plug (NEMA 6-20 P).
It will only fit in a NEMA 6-20 outlet. DO NOT BEND OR REMOVE PRONGS. If other
power cord plugs are required, please consult the factory.
FORM: OWNERS MNUL
REV: 11-29-07
APPR BY: EW
120 V ac: 20 Amp, 60 Hertz
208/220 V ac: 10 Amp, 60 Hertz
175 lbs, Magnetic Particle Break
10 feet, 3 prong. 120: 5-20P, 208/220: 6-20P
NEMA 5-20 R Receptacle (Dedicated circuit required)
NEMA 6-20 R Receptacle (Dedicated circuit required)
15 A slo-blo, 3AG
10 A slo-blo, 3AG
14