Electrical Specifications - Woodway DESMO '05 Owner's Manual

Electrical Specifications

Electrical Requirements – Below are the standard electrical requirements, if you have
a different electrical configuration please contact your sales representative. There are
two different options depending on which model you own.
Power Requirements: 120 V ac: 20 Amp, 60 Hertz
Optional 230 Vac, 20 Amp, 50/60 hertz
*20 Amp Dedicated line required (cannot share neutral) If you have 120 volts out of the
wall outlet and more than one major appliance on the hot or neutral line, the voltage will
drop below 10% minimum of 120 volts and the treadmill will shut off and reset.
Wall Outlet Requirements:
120 V ac: NEMA 5-20 R Receptacle (Dedicated circuit required)
208 or 220 V ac: NEMA 6-20 R Receptacle (Dedicated circuit required)
Outlet Compatibility:
The 120 V ac input WOODWAY treadmill comes standard with a 3-prong plug (NEMA
5-20 P). The only outlet that the plug can be installed is a NEMA 5-20 R – which does
not share the neutral.
The 208 V or 220 V ac input WOODWAY treadmill has a 3-prong plug (NEMA 6-20 P).
It will only fit in a NEMA 6-20 outlet. DO NOT BEND OR REMOVE PRONGS. If other
power cord plugs are required, please consult the factory.
Medical Models: The 120 V ac input WOODWAY treadmill comes standard with a 3-
prong, hospital grade.
(NEMA 5-20 P). The only outlet that the plug can be installed in is a NEMA 5-20 R
receptacle that does not share the neutral.
Note: For grounding reliability, only connect to the proper receptacle marked "Hospital
Grade".
14
FORM: OWNERS MNUL
REV: 1-19-08
APPR BY: EW